Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular development board with 16-pin PCIe connector and MiniPCIe slot, silver mounting holes, gold edge contacts

LORDWORLD

LORDWORLD PCIe to MiniPCIe HAT+ 16-pin development board

SKU CH-M9QQ-D00SW

Adds MiniPCIe expansion to Raspberry Pi 5 via 16-pin cable, supporting wireless NICs, AI modules and USB Bluetooth

  • Driver-free plug-and-play setup on Raspberry Pi 5
  • Connects via 16-pin PCIe cable to the Pi 5
  • Accepts MiniPCIe wireless NICs and AI modules
  • Enables USB Bluetooth input after NIC installation
  • Includes thermal tape for official active cooler mounting

Raspberry Pi 5 PCIe HAT+

This development board converts the Raspberry Pi 5 16-pin PCIe interface to a MiniPCIe slot. It targets makers and engineers who need to add wireless NICs or AI accelerator modules to the single-board computer without custom wiring.

Driver-free MiniPCIe expansion

The adapter operates plug-and-play once a compatible MiniPCIe card is installed. Adding a wireless NIC also enables a USB Bluetooth pathway into the Pi, letting the module feed Bluetooth signals through the board's USB connection without extra drivers.

Thermal-tape mounting with official cooler

Installation requires applying the supplied thermal tapes before fitting the official Raspberry Pi Active Cooler on top of the HAT. The 16-pin cable routes the PCIe link away from the Pi's GPIO header, keeping the primary expansion header free for other add-ons.

Kohokohdat

  • Driver-free plug-and-play setup on Raspberry Pi 5
  • Connects via 16-pin PCIe cable to the Pi 5
  • Accepts MiniPCIe wireless NICs and AI modules
  • Enables USB Bluetooth input after NIC installation
  • Includes thermal tape for official active cooler mounting

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

Will the 16-pin PCIe cable or thermal tapes need replacement after extended use?

The HAT+ connects to the Raspberry Pi 5 through a 16-pin PCIe cable and installs with supplied thermal tapes and the official active cooler; both are passive components with no defined service interval.

What limits throughput when a MiniPCIe network card runs continuously on this adapter?

Sustained throughput is bounded by the Raspberry Pi 5's single-lane PCIe Gen 2 link and the MiniPCIe card's own capabilities, not by the HAT+ itself.

Does the board add audible noise or extra heat when a wireless module runs all day?

The adapter has no fan or active parts; heat comes from the installed MiniPCIe module and is managed by the Pi 5's official active cooler mounted above the HAT+.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.