BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00280417BTC
Stokta
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1333MHz POSIFLEX XT-5515Pro JIVA memory upgrade
16GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminal, CL9 1333MHz speed
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX XT-5515Pro JIVA terminal
- 16 GB kit delivered as two 8 GB SODIMMs
- DDR3 1333 MHz PC3-10600 for responsive operation
- Non-ECC unbuffered 204-pin modules install in minutes
- Major OEM chips ensure reliable long-term service
POSIFLEX XT-5515Pro JIVA memory kit
This 16 GB kit contains two 8 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets retailers and system integrators who need to maximise the memory capacity of that specific point-of-sale platform.
16 GB DDR3 1333 MHz capacity and headroom
Running at 1333 MHz with CL9 latency and 1.50 V, the dual-rank 2Rx8 modules fill both SODIMM slots to reach the platform's 16 GB limit. The kit handles typical POS workloads and multi-tasking, but cannot exceed the board's maximum supported capacity.
204-pin SODIMM form factor and voltage
The 204-pin unbuffered non-ECC design matches the terminal's slot keying and operates at the specified 1.35 V low-voltage level. No heat spreaders or extra cables are included; the modules install directly into the existing sockets.
Öne çıkanlar
- Designed for POSIFLEX XT-5515Pro JIVA terminal
- 16 GB kit delivered as two 8 GB SODIMMs
- DDR3 1333 MHz PC3-10600 for responsive operation
- Non-ECC unbuffered 204-pin modules install in minutes
- Major OEM chips ensure reliable long-term service
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Bu ürünle ilgili sorular
Will the 2x8GB DDR3 1333MHz SODIMMs run in my POSIFLEX XT-5515Pro JIVA alongside any existing 1.50V modules I keep?
The kit is specified at 1.35V while the platform also supports 1.50V modules; mixing voltages can cause instability, so replace all modules with this matched 16GB kit for reliable operation.
How can I verify the 204-pin CL9 modules are recognised at 1333MHz after installation?
Enter the BIOS on the POSIFLEX XT-5515Pro JIVA and confirm the memory shows 16GB total, DDR3-1333 speed and CAS latency 9.
Does the MS10600-828K2 box contain only the two 8GB SODIMMs or any extra brackets or tools?
The package content lists only the 16GB (2x8GB) DDR3 1333MHz SODIMM kit; no brackets, screws or tools are included.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
