Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR3 SODIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333MHz POSIFLEX XT-5515Pro JIVA memory upgrade

SKU CH-NE7H-2AJNW

16GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminal, CL9 1333MHz speed

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-5515Pro JIVA terminal
  • 16 GB kit delivered as two 8 GB SODIMMs
  • DDR3 1333 MHz PC3-10600 for responsive operation
  • Non-ECC unbuffered 204-pin modules install in minutes
  • Major OEM chips ensure reliable long-term service

POSIFLEX XT-5515Pro JIVA memory kit

This 16 GB kit contains two 8 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets retailers and system integrators who need to maximise the memory capacity of that specific point-of-sale platform.

16 GB DDR3 1333 MHz capacity and headroom

Running at 1333 MHz with CL9 latency and 1.50 V, the dual-rank 2Rx8 modules fill both SODIMM slots to reach the platform's 16 GB limit. The kit handles typical POS workloads and multi-tasking, but cannot exceed the board's maximum supported capacity.

204-pin SODIMM form factor and voltage

The 204-pin unbuffered non-ECC design matches the terminal's slot keying and operates at the specified 1.35 V low-voltage level. No heat spreaders or extra cables are included; the modules install directly into the existing sockets.

Punti di forza

  • Designed for POSIFLEX XT-5515Pro JIVA terminal
  • 16 GB kit delivered as two 8 GB SODIMMs
  • DDR3 1333 MHz PC3-10600 for responsive operation
  • Non-ECC unbuffered 204-pin modules install in minutes
  • Major OEM chips ensure reliable long-term service

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Domande su questo articolo

Will the 2x8GB DDR3 1333MHz SODIMMs run in my POSIFLEX XT-5515Pro JIVA alongside any existing 1.50V modules I keep?

The kit is specified at 1.35V while the platform also supports 1.50V modules; mixing voltages can cause instability, so replace all modules with this matched 16GB kit for reliable operation.

How can I verify the 204-pin CL9 modules are recognised at 1333MHz after installation?

Enter the BIOS on the POSIFLEX XT-5515Pro JIVA and confirm the memory shows 16GB total, DDR3-1333 speed and CAS latency 9.

Does the MS10600-828K2 box contain only the two 8GB SODIMMs or any extra brackets or tools?

The package content lists only the 16GB (2x8GB) DDR3 1333MHz SODIMM kit; no brackets, screws or tools are included.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.