Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Two green DDR3 SODIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333MHz POSIFLEX XT-5515Pro JIVA memory upgrade

SKU CH-NE7H-2AJNW

16GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminal, CL9 1333MHz speed

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-5515Pro JIVA terminal
  • 16 GB kit delivered as two 8 GB SODIMMs
  • DDR3 1333 MHz PC3-10600 for responsive operation
  • Non-ECC unbuffered 204-pin modules install in minutes
  • Major OEM chips ensure reliable long-term service

POSIFLEX XT-5515Pro JIVA memory kit

This 16 GB kit contains two 8 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets retailers and system integrators who need to maximise the memory capacity of that specific point-of-sale platform.

16 GB DDR3 1333 MHz capacity and headroom

Running at 1333 MHz with CL9 latency and 1.50 V, the dual-rank 2Rx8 modules fill both SODIMM slots to reach the platform's 16 GB limit. The kit handles typical POS workloads and multi-tasking, but cannot exceed the board's maximum supported capacity.

204-pin SODIMM form factor and voltage

The 204-pin unbuffered non-ECC design matches the terminal's slot keying and operates at the specified 1.35 V low-voltage level. No heat spreaders or extra cables are included; the modules install directly into the existing sockets.

Акценти

  • Designed for POSIFLEX XT-5515Pro JIVA terminal
  • 16 GB kit delivered as two 8 GB SODIMMs
  • DDR3 1333 MHz PC3-10600 for responsive operation
  • Non-ECC unbuffered 204-pin modules install in minutes
  • Major OEM chips ensure reliable long-term service

Спецификации

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Въпроси за този артикул

Will the 2x8GB DDR3 1333MHz SODIMMs run in my POSIFLEX XT-5515Pro JIVA alongside any existing 1.50V modules I keep?

The kit is specified at 1.35V while the platform also supports 1.50V modules; mixing voltages can cause instability, so replace all modules with this matched 16GB kit for reliable operation.

How can I verify the 204-pin CL9 modules are recognised at 1333MHz after installation?

Enter the BIOS on the POSIFLEX XT-5515Pro JIVA and confirm the memory shows 16GB total, DDR3-1333 speed and CAS latency 9.

Does the MS10600-828K2 box contain only the two 8GB SODIMMs or any extra brackets or tools?

The package content lists only the 16GB (2x8GB) DDR3 1333MHz SODIMM kit; no brackets, screws or tools are included.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.