BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278211BTC
Stokta
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 PC4-25600 CL22 1Rx8 1.2V 288-Pin UDIMM for HPE P43019-B21
16GB DDR4 3200 UDIMM module rated CL22 at 1.2V for HPE P43019-B21 systems
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 MHz boosts multitasking speed
- CL22 latency at 1.2 V keeps power draw low
- 1Rx8 single-rank layout aids memory controller efficiency
- 288-pin UDIMM fits HPE P43019-B21 workstations directly
- Built with Samsung, Micron or Hynix chips for reliability
16 GB DDR4 UDIMM for HPE Systems
This 16 GB DDR4 3200 module is built for HPE desktops and workstations that accept standard 288-pin unbuffered non-ECC memory. It delivers a straightforward capacity boost for everyday productivity and light multitasking.
Compatibility limits and alternatives
The stick suits owners of HPE P43019-B21 compatible platforms needing a single 16 GB upgrade without ECC or registered buffering. Buyers whose systems require error-correcting code, registered DIMMs, or higher-density kits should look at other modules.
CL22 latency at 1.20 V
Operating at CL22 with a 1.20 V supply, this 1Rx8 module runs at the standard DDR4 3200 speed grade. That timing and voltage combination determines whether the memory matches the motherboard's supported profile.
Öne çıkanlar
- 16 GB DDR4 3200 MHz boosts multitasking speed
- CL22 latency at 1.2 V keeps power draw low
- 1Rx8 single-rank layout aids memory controller efficiency
- 288-pin UDIMM fits HPE P43019-B21 workstations directly
- Built with Samsung, Micron or Hynix chips for reliability
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-618K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | HPE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Bu ürünle ilgili sorular
What motherboard slot is required to install this 288-pin DDR4 UDIMM?
A desktop or workstation motherboard with a standard 288-pin DDR4 DIMM slot is needed; the module is non-ECC and unbuffered, so the slot must accept that type.
Will this CL22 3200 MHz stick downclock automatically when paired with older DDR4 modules running at lower speeds?
Yes, DDR4 modules negotiate a common speed at boot; this stick will run at the highest frequency all installed modules support.
How can I verify the module is recognised at 3200 MT/s and CL22 after installation?
Check the system BIOS or a tool such as CPU-Z; the memory tab should show 3200 MT/s (PC4-25600) and CL22 timings for the new DIMM.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
