Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green bare circuit board memory module with gold edge connectors and black chips

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 PC4-25600 CL22 1Rx8 1.2V 288-Pin UDIMM for HPE P43019-B21

SKU CH-MCSN-1PYVX

16GB DDR4 3200 UDIMM module rated CL22 at 1.2V for HPE P43019-B21 systems

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts multitasking speed
  • CL22 latency at 1.2 V keeps power draw low
  • 1Rx8 single-rank layout aids memory controller efficiency
  • 288-pin UDIMM fits HPE P43019-B21 workstations directly
  • Built with Samsung, Micron or Hynix chips for reliability

16 GB DDR4 UDIMM for HPE Systems

This 16 GB DDR4 3200 module is built for HPE desktops and workstations that accept standard 288-pin unbuffered non-ECC memory. It delivers a straightforward capacity boost for everyday productivity and light multitasking.

Compatibility limits and alternatives

The stick suits owners of HPE P43019-B21 compatible platforms needing a single 16 GB upgrade without ECC or registered buffering. Buyers whose systems require error-correcting code, registered DIMMs, or higher-density kits should look at other modules.

CL22 latency at 1.20 V

Operating at CL22 with a 1.20 V supply, this 1Rx8 module runs at the standard DDR4 3200 speed grade. That timing and voltage combination determines whether the memory matches the motherboard's supported profile.

Istaknuto

  • 16 GB DDR4 3200 MHz boosts multitasking speed
  • CL22 latency at 1.2 V keeps power draw low
  • 1Rx8 single-rank layout aids memory controller efficiency
  • 288-pin UDIMM fits HPE P43019-B21 workstations directly
  • Built with Samsung, Micron or Hynix chips for reliability

Specifikacije

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-618K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Pitanja o ovom artiklu

What motherboard slot is required to install this 288-pin DDR4 UDIMM?

A desktop or workstation motherboard with a standard 288-pin DDR4 DIMM slot is needed; the module is non-ECC and unbuffered, so the slot must accept that type.

Will this CL22 3200 MHz stick downclock automatically when paired with older DDR4 modules running at lower speeds?

Yes, DDR4 modules negotiate a common speed at boot; this stick will run at the highest frequency all installed modules support.

How can I verify the module is recognised at 3200 MT/s and CL22 after installation?

Check the system BIOS or a tool such as CPU-Z; the memory tab should show 3200 MT/s (PC4-25600) and CL22 timings for the new DIMM.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.