Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green bare circuit board memory module with gold edge connectors and black chips

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 PC4-25600 CL22 1Rx8 1.2V 288-Pin UDIMM for HPE P43019-B21

SKU CH-MCSN-1PYVX

16GB DDR4 3200 UDIMM module rated CL22 at 1.2V for HPE P43019-B21 systems

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts multitasking speed
  • CL22 latency at 1.2 V keeps power draw low
  • 1Rx8 single-rank layout aids memory controller efficiency
  • 288-pin UDIMM fits HPE P43019-B21 workstations directly
  • Built with Samsung, Micron or Hynix chips for reliability

16 GB DDR4 UDIMM for HPE Systems

This 16 GB DDR4 3200 module is built for HPE desktops and workstations that accept standard 288-pin unbuffered non-ECC memory. It delivers a straightforward capacity boost for everyday productivity and light multitasking.

Compatibility limits and alternatives

The stick suits owners of HPE P43019-B21 compatible platforms needing a single 16 GB upgrade without ECC or registered buffering. Buyers whose systems require error-correcting code, registered DIMMs, or higher-density kits should look at other modules.

CL22 latency at 1.20 V

Operating at CL22 with a 1.20 V supply, this 1Rx8 module runs at the standard DDR4 3200 speed grade. That timing and voltage combination determines whether the memory matches the motherboard's supported profile.

Punti di forza

  • 16 GB DDR4 3200 MHz boosts multitasking speed
  • CL22 latency at 1.2 V keeps power draw low
  • 1Rx8 single-rank layout aids memory controller efficiency
  • 288-pin UDIMM fits HPE P43019-B21 workstations directly
  • Built with Samsung, Micron or Hynix chips for reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-618K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Domande su questo articolo

What motherboard slot is required to install this 288-pin DDR4 UDIMM?

A desktop or workstation motherboard with a standard 288-pin DDR4 DIMM slot is needed; the module is non-ECC and unbuffered, so the slot must accept that type.

Will this CL22 3200 MHz stick downclock automatically when paired with older DDR4 modules running at lower speeds?

Yes, DDR4 modules negotiate a common speed at boot; this stick will run at the highest frequency all installed modules support.

How can I verify the module is recognised at 3200 MT/s and CL22 after installation?

Check the system BIOS or a tool such as CPU-Z; the memory tab should show 3200 MT/s (PC4-25600) and CL22 timings for the new DIMM.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.