Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two green DDR5 RDIMM modules with black chips no heat spreader

NEMIX RAM

NEMIX RAM 192GB DDR5 4800 CL40 2Rx4 ECC RDIMM 2x96GB Supermicro H13DSG-O-CPU-D memory upgrade

SKU CH-T7S2-Z7YWZ

A 192 GB DDR5 ECC Registered RDIMM kit (2 x 96 GB) running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H13DSG-O-CPU-D motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

30 yapılandırma daha gösterin
  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC design corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D
  • 2Rx4 dual-rank organisation allows full-slot population

Exact-fit server memory kit

This 192GB kit contains two 96GB DDR5 RDIMMs built to the Supermicro H13DSG-O-CPU-D motherboard's specifications. Registered ECC modules with a 2Rx4 rank configuration ensure the memory controller recognises full capacity across every populated slot. The 288-pin form factor matches the board's DIMM sockets precisely. System administrators upgrading compatible Supermicro platforms receive a validated, ready-to-install solution.

Sustained enterprise stability

Registered architecture buffers address and command signals so the memory controller drives all slots at rated speed without signal degradation under continuous load. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption during long-running workloads. Modules operate at 1.10V, reducing thermal stress when the system runs fully populated for extended periods. This combination keeps production services stable through heavy, sustained utilisation.

DDR5 4800 CL40 specification

Rated at DDR5 4800 (PC5-38400) with CL40 latency, these modules deliver the exact timing the platform expects for error-free initialisation. Deviating from this speed or latency grade can cause training failures or forced downclocking. The 2Rx4 organisation and registered buffer are mandatory for this motherboard's population rules. Verify the manual's approved DIMM sequence before installation to guarantee full 192GB recognition.

Öne çıkanlar

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC design corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D
  • 2Rx4 dual-rank organisation allows full-slot population

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the 1.10V DDR5 4800 kit run hot or draw more power when the Supermicro H13DSG-O-CPU-D is fully loaded all day?

The modules operate at the standard DDR5 voltage of 1.10V with no heat spreader, so thermal output and power draw stay at the JEDEC baseline for 4800 CL40 registered DIMMs under sustained load.

What must the Supermicro H13DSG-O-CPU-D motherboard already provide for this 2Rx4 ECC RDIMM kit to function?

The board needs DDR5 RDIMM slots that support 2Rx4 registered ECC modules at 4800 MT/s and 1.10V, plus a memory controller able to address 96GB per DIMM in the population order the manual specifies.

Will the 288-pin registered ECC modules work in the same channels as any lower-capacity DDR5 RDIMMs I keep in the H13DSG-O-CPU-D?

Yes, provided the existing DIMMs are also DDR5 registered ECC at 1.10V; the memory controller will train all populated slots to a common speed and timing, so the 96GB modules coexist with smaller registered kits.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.