Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Six green DDR5 RDIMM modules in a row, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 288GB (6x48GB) DDR5 6400 CL52 2Rx8 ECC RDIMM memory upgrade

SKU CH-STYC-76CV7

A 288 GB DDR5 server memory kit with six 48 GB ECC registered modules running at 6400 MHz CL52 and 1.1 V, validated for the GIGABYTE MZ73-LM0 motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

24 yapılandırma daha gösterin
  • 288 GB capacity with six 48 GB modules for dense server workloads
  • DDR5 6400 speed rated at CL52 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation matches platform voltage spec for stable full-population performance
  • Verified fitment for GIGABYTE MZ73-LM0 motherboard ensures correct DIMM population

Exact-match DDR5 server kit

This 288GB kit contains six 48GB DDR5-6400 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ73-LM0 motherboard expects. The modules operate at 1.1V with CL52 latency and a 2Rx8 organisation, so the memory controller recognises the full capacity and runs at the rated 6400 MT/s speed. It is intended for administrators who need maximum supported memory in a compatible server platform.

Registered ECC DDR5 constraints

Registered (buffered) architecture offloads the memory controller, allowing every slot to run fully populated at full capacity while ECC corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM form factor is required; UDIMM or SODIMM modules will not fit or function. Population rules and maximum supported capacity vary by motherboard revision, so the system manual must be consulted before installation.

Straightforward slot installation

Modules install by aligning the key notch with the 288-pin DDR5 slot and pressing firmly until the retention clips engage; no heat spreader is present, so clearance is minimal. Common issues arise when the population order in the manual is ignored, when a UDIMM is mistakenly used, or when the BIOS is not updated to support the full 288GB configuration. Consult the motherboard documentation for the approved DIMM sequence and firmware requirements.

Öne çıkanlar

  • 288 GB capacity with six 48 GB modules for dense server workloads
  • DDR5 6400 speed rated at CL52 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation matches platform voltage spec for stable full-population performance
  • Verified fitment for GIGABYTE MZ73-LM0 motherboard ensures correct DIMM population

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Should I choose the 6 x 48 GB kit or a different capacity for my GIGABYTE MZ73-LM0?

The kit provides 288 GB total across six 48 GB modules, matching the board's DDR5 6400 RDIMM requirement and letting you fill every slot with the registered ECC configuration the memory controller expects.

What does the DDR5 6400 (PC5-51200) rating mean once the modules are installed in the server?

The memory runs at 6400 MT/s with CL52 latency at 1.10 V, delivering the full bandwidth the platform specifies when all six registered DIMMs are populated.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered buffer reduces electrical load on the memory controller so all six slots run stably at rated speed, while on-die ECC corrects single-bit errors before they cause data corruption or reboots.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.