BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00279295BTC
Stokta
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM for ASRock IMB-1317/X1317 memory upgrade
64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V unbuffered UDIMMs for ASRock IMB-1317 and IMB-X1317 motherboards
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operation reduces system power draw
- CL46 CAS latency for responsive memory access
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
64 GB DDR5 kit for ASRock IMB-1317/X1317
This 64 GB kit contains four 16 GB DDR5 5600 CL46 modules that run at 1.1 V on a 288-pin UDIMM form factor. It is built for the ASRock Industrial Micro-ATX motherboards IMB-1317 and IMB-X1317. The non-ECC unbuffered design suits standard desktop workloads. Major OEM chips from Samsung, Micron or Hynix provide the memory array.
Suited for IMB-1317/X1317 upgrades.
Builders who need a straightforward capacity increase for the listed ASRock boards can install this kit without configuration changes. Systems that require error-correcting code memory or registered modules cannot use these sticks. Buyers who want more storage or a different pin layout should look at something else.
DDR5 5600 CL46 at 1.1 V decides fit
The modules operate at DDR5 5600 (PC5-44800) with a CAS latency of 46 and a voltage of 1.1 V. That speed and timing combination is the single specification that determines whether the kit matches the motherboard's memory controller requirements. If the board demands a different data rate or latency, this kit will not be compatible.
Öne çıkanlar
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operation reduces system power draw
- CL46 CAS latency for responsive memory access
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Bu ürünle ilgili sorular
How can I confirm the kit is running at DDR5 5600 CL46 1.10V after installation?
Open the BIOS or a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s, CAS latency shows 46 and voltage reports 1.10V.
What does the package contain and is anything else required for the ASRock IMB-1317 or IMB-X1317?
The box includes four 16 GB 288-pin DDR5 UDIMM modules for a total of 64 GB; no extra parts are needed for those motherboards.
Which capacity or speed version should I choose for the IMB-1317 and IMB-X1317?
This 64 GB kit at DDR5 5600 CL46 1.10V is the specific configuration validated for those two ASRock Industrial boards.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
