Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM for ASRock IMB-1317/X1317 memory upgrade

SKU CH-PSHX-22Q6Q

64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V unbuffered UDIMMs for ASRock IMB-1317 and IMB-X1317 motherboards

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.10 V operation reduces system power draw
  • CL46 CAS latency for responsive memory access
  • Validated for ASRock IMB-1317 and IMB-X1317 motherboards

64 GB DDR5 kit for ASRock IMB-1317/X1317

This 64 GB kit contains four 16 GB DDR5 5600 CL46 modules that run at 1.1 V on a 288-pin UDIMM form factor. It is built for the ASRock Industrial Micro-ATX motherboards IMB-1317 and IMB-X1317. The non-ECC unbuffered design suits standard desktop workloads. Major OEM chips from Samsung, Micron or Hynix provide the memory array.

Suited for IMB-1317/X1317 upgrades.

Builders who need a straightforward capacity increase for the listed ASRock boards can install this kit without configuration changes. Systems that require error-correcting code memory or registered modules cannot use these sticks. Buyers who want more storage or a different pin layout should look at something else.

DDR5 5600 CL46 at 1.1 V decides fit

The modules operate at DDR5 5600 (PC5-44800) with a CAS latency of 46 and a voltage of 1.1 V. That speed and timing combination is the single specification that determines whether the kit matches the motherboard's memory controller requirements. If the board demands a different data rate or latency, this kit will not be compatible.

Fordele

  • 64 GB total capacity from four 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • Low 1.10 V operation reduces system power draw
  • CL46 CAS latency for responsive memory access
  • Validated for ASRock IMB-1317 and IMB-X1317 motherboards

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock Industrial
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Spørgsmål om denne vare

How can I confirm the kit is running at DDR5 5600 CL46 1.10V after installation?

Open the BIOS or a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s, CAS latency shows 46 and voltage reports 1.10V.

What does the package contain and is anything else required for the ASRock IMB-1317 or IMB-X1317?

The box includes four 16 GB 288-pin DDR5 UDIMM modules for a total of 64 GB; no extra parts are needed for those motherboards.

Which capacity or speed version should I choose for the IMB-1317 and IMB-X1317?

This 64 GB kit at DDR5 5600 CL46 1.10V is the specific configuration validated for those two ASRock Industrial boards.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.