BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277636BTC
På lager
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM for ASRock IMB-1317/X1317 memory upgrade
64 GB kit of four 16 GB DDR5 5600 CL46 1.1 V unbuffered UDIMMs for ASRock IMB-1317 and IMB-X1317 motherboards
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operation reduces system power draw
- CL46 CAS latency for responsive memory access
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
64 GB DDR5 kit for ASRock IMB-1317/X1317
This 64 GB kit contains four 16 GB DDR5 5600 CL46 modules that run at 1.1 V on a 288-pin UDIMM form factor. It is built for the ASRock Industrial Micro-ATX motherboards IMB-1317 and IMB-X1317. The non-ECC unbuffered design suits standard desktop workloads. Major OEM chips from Samsung, Micron or Hynix provide the memory array.
Suited for IMB-1317/X1317 upgrades.
Builders who need a straightforward capacity increase for the listed ASRock boards can install this kit without configuration changes. Systems that require error-correcting code memory or registered modules cannot use these sticks. Buyers who want more storage or a different pin layout should look at something else.
DDR5 5600 CL46 at 1.1 V decides fit
The modules operate at DDR5 5600 (PC5-44800) with a CAS latency of 46 and a voltage of 1.1 V. That speed and timing combination is the single specification that determines whether the kit matches the motherboard's memory controller requirements. If the board demands a different data rate or latency, this kit will not be compatible.
Høydepunkter
- 64 GB total capacity from four 16 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.10 V operation reduces system power draw
- CL46 CAS latency for responsive memory access
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
Spesifikasjoner
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Spørsmål om denne varen
How can I confirm the kit is running at DDR5 5600 CL46 1.10V after installation?
Open the BIOS or a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s, CAS latency shows 46 and voltage reports 1.10V.
What does the package contain and is anything else required for the ASRock IMB-1317 or IMB-X1317?
The box includes four 16 GB 288-pin DDR5 UDIMM modules for a total of 64 GB; no extra parts are needed for those motherboards.
Which capacity or speed version should I choose for the IMB-1317 and IMB-X1317?
This 64 GB kit at DDR5 5600 CL46 1.10V is the specific configuration validated for those two ASRock Industrial boards.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280219BTC
På lager
