NEMIX RAM
NEMIX RAM 8GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX XT-5515Pro memory upgrade
8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX XT-5515Pro terminals with 1.35V low-voltage operation
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8GB capacity expands POS terminal multitasking headroom
- DDR3 1333MHz speed matches XT-5515Pro memory bus
- 204-pin SODIMM form factor fits JIVA fanless chassis
- 35V low-voltage operation reduces thermal load
- CL9 latency supports responsive transaction processing
System-specific DDR3 SODIMM for POSIFLEX terminals
This 8GB DDR3 1333MHz module is built for the POSIFLEX XT-5515Pro JIVA fanless point-of-sale terminal. It uses a 204-pin SODIMM form factor with a 2Rx8 rank configuration. The kit suits technicians upgrading memory in dedicated retail or hospitality hardware.
DDR3 1333MHz speed and voltage window
The module runs at PC3-10600 with a CAS latency of CL9. It is rated for 1.35V operation while the specification also lists a 1.50V value, so the host system must accept low-voltage DDR3 SODIMMs. Non-ECC unbuffered chips mean no error correction or registered buffering is available.
Tool-free slot access on fanless chassis
Installation requires opening the terminal's memory compartment and seating the SODIMM at the correct angle until the clips lock. The fanless design leaves limited internal space, so careful alignment prevents bent pins. No heat spreader is fitted, so airflow in the sealed enclosure remains unchanged.
Öne çıkanlar
- 8GB capacity expands POS terminal multitasking headroom
- DDR3 1333MHz speed matches XT-5515Pro memory bus
- 204-pin SODIMM form factor fits JIVA fanless chassis
- 35V low-voltage operation reduces thermal load
- CL9 latency supports responsive transaction processing
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Bu ürünle ilgili sorular
Is this a single 8GB module or a kit of multiple sticks?
The module is supplied as one 8GB stick, not a multi-stick kit.
Will the 1333MHz speed run at that rate in my POSIFLEX XT-5515Pro?
The SODIMM is rated for DDR3 1333 (PC3-10600) and will operate at that speed when the system supports it.
Does the 204-pin DDR3 SODIMM fit the XT-5515Pro memory slot?
Yes, the 204-pin DDR3 SODIMM form factor matches the memory slot used in the POSIFLEX XT-5515Pro.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
$104,99
0.00132707BTC
Stokta
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
$7,99
0.00010099BTC
Stokta