저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX XT-5515Pro memory upgrade

SKU CH-E7Q7-NEGY3

8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX XT-5515Pro terminals with 1.35V low-voltage operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches XT-5515Pro memory bus
  • 204-pin SODIMM form factor fits JIVA fanless chassis
  • 35V low-voltage operation reduces thermal load
  • CL9 latency supports responsive transaction processing

System-specific DDR3 SODIMM for POSIFLEX terminals

This 8GB DDR3 1333MHz module is built for the POSIFLEX XT-5515Pro JIVA fanless point-of-sale terminal. It uses a 204-pin SODIMM form factor with a 2Rx8 rank configuration. The kit suits technicians upgrading memory in dedicated retail or hospitality hardware.

DDR3 1333MHz speed and voltage window

The module runs at PC3-10600 with a CAS latency of CL9. It is rated for 1.35V operation while the specification also lists a 1.50V value, so the host system must accept low-voltage DDR3 SODIMMs. Non-ECC unbuffered chips mean no error correction or registered buffering is available.

Tool-free slot access on fanless chassis

Installation requires opening the terminal's memory compartment and seating the SODIMM at the correct angle until the clips lock. The fanless design leaves limited internal space, so careful alignment prevents bent pins. No heat spreader is fitted, so airflow in the sealed enclosure remains unchanged.

주요 특징

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches XT-5515Pro memory bus
  • 204-pin SODIMM form factor fits JIVA fanless chassis
  • 35V low-voltage operation reduces thermal load
  • CL9 latency supports responsive transaction processing

사양

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

이 상품에 대한 질문

Is this a single 8GB module or a kit of multiple sticks?

The module is supplied as one 8GB stick, not a multi-stick kit.

Will the 1333MHz speed run at that rate in my POSIFLEX XT-5515Pro?

The SODIMM is rated for DDR3 1333 (PC3-10600) and will operate at that speed when the system supports it.

Does the 204-pin DDR3 SODIMM fit the XT-5515Pro memory slot?

Yes, the 204-pin DDR3 SODIMM form factor matches the memory slot used in the POSIFLEX XT-5515Pro.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.