暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX XT-5515Pro memory upgrade

SKU CH-E7Q7-NEGY3

8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX XT-5515Pro terminals with 1.35V low-voltage operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches XT-5515Pro memory bus
  • 204-pin SODIMM form factor fits JIVA fanless chassis
  • 35V low-voltage operation reduces thermal load
  • CL9 latency supports responsive transaction processing

System-specific DDR3 SODIMM for POSIFLEX terminals

This 8GB DDR3 1333MHz module is built for the POSIFLEX XT-5515Pro JIVA fanless point-of-sale terminal. It uses a 204-pin SODIMM form factor with a 2Rx8 rank configuration. The kit suits technicians upgrading memory in dedicated retail or hospitality hardware.

DDR3 1333MHz speed and voltage window

The module runs at PC3-10600 with a CAS latency of CL9. It is rated for 1.35V operation while the specification also lists a 1.50V value, so the host system must accept low-voltage DDR3 SODIMMs. Non-ECC unbuffered chips mean no error correction or registered buffering is available.

Tool-free slot access on fanless chassis

Installation requires opening the terminal's memory compartment and seating the SODIMM at the correct angle until the clips lock. The fanless design leaves limited internal space, so careful alignment prevents bent pins. No heat spreader is fitted, so airflow in the sealed enclosure remains unchanged.

特長

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches XT-5515Pro memory bus
  • 204-pin SODIMM form factor fits JIVA fanless chassis
  • 35V low-voltage operation reduces thermal load
  • CL9 latency supports responsive transaction processing

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Is this a single 8GB module or a kit of multiple sticks?

The module is supplied as one 8GB stick, not a multi-stick kit.

Will the 1333MHz speed run at that rate in my POSIFLEX XT-5515Pro?

The SODIMM is rated for DDR3 1333 (PC3-10600) and will operate at that speed when the system supports it.

Does the 204-pin DDR3 SODIMM fit the XT-5515Pro memory slot?

Yes, the 204-pin DDR3 SODIMM form factor matches the memory slot used in the POSIFLEX XT-5515Pro.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。