NuoTo
NuoTo IMX477 12.3MP 100° FOV M12 Lens barebone mini PC
A 12.3MP IMX477 camera module with motorised focus and 100° field of view for Jetson Nano and Xavier NX
- CPU TypeOther
- Motorised focus via I²C removes manual lens adjustment
- 3 MP IMX477 sensor delivers 4056 × 3040 stills
- 100° diagonal field of view covers wide scenes
- Focus range 80 mm to infinity suits close and far subjects
- Compact 14 × 18.67 mm board fits tight enclosures
Purpose-built vision module
The NuoTo IMX477 barebone mini PC integrates a 12.3MP Sony IMX477 sensor with a motorised M12 lens for software-controlled focus. It targets developers building Jetson Nano or Xavier NX vision systems who need remote focus adjustment without physical access to the device.
Sustained imaging behaviour
The rolling-shutter sensor delivers 4056 × 3040 stills and maintains consistent exposure during long monitoring sessions. Motorised focus operates over I2C, allowing scripted autofocus or keyboard fine-tuning while the camera runs continuously in surveillance or printer-watch roles.
Pre-order checklist
Verify your carrier board exposes the camera I2C bus and matches the 14 × 18.67 mm module footprint. Confirm the 3.9 mm focal length and 100° diagonal FOV suit the working distance, which starts at 80 mm. Standard Raspberry Pi boards are not supported; only Compute Module or Jetson platforms apply.
Öne çıkanlar
- Motorised focus via I²C removes manual lens adjustment
- 3 MP IMX477 sensor delivers 4056 × 3040 stills
- 100° diagonal field of view covers wide scenes
- Focus range 80 mm to infinity suits close and far subjects
- Compact 14 × 18.67 mm board fits tight enclosures
Teknik özellikler
| CPU Type | Other |
|---|
Bu ürünle ilgili sorular
Does the motorised focus draw extra power or create noise when the IMX477 runs continuously?
The focus motor is driven over the camera I²C bus and adds only a few milliwatts; it is silent because there is no fan or moving part except the tiny lens actuator.
Which host board and connector must I already own to use this M12-mount module?
You need an NVIDIA Jetson Nano or Xavier NX with a CSI-2 camera header; standard Raspberry Pi 3, 3B+ or 4 boards are not compatible.
Will the 100° diagonal field of view match the narrower 75° horizontal view I get on my current Raspberry Pi HQ Camera?
No — this module delivers 100° diagonal, 87° horizontal and 71° vertical on Jetson, which is wider than the 75° horizontal you see on the Pi HQ Camera.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



