Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Tiny bare circuit board with M12 lens module and autofocus motor

NuoTo

NuoTo IMX477 12.3MP 100° FOV M12 Lens barebone mini PC

SKU CH-E8ZR-T4JFM MPN IMX477

A 12.3MP IMX477 camera module with motorised focus and 100° field of view for Jetson Nano and Xavier NX

  • CPU TypeOther
  • Motorised focus via I²C removes manual lens adjustment
  • 3 MP IMX477 sensor delivers 4056 × 3040 stills
  • 100° diagonal field of view covers wide scenes
  • Focus range 80 mm to infinity suits close and far subjects
  • Compact 14 × 18.67 mm board fits tight enclosures

Purpose-built vision module

The NuoTo IMX477 barebone mini PC integrates a 12.3MP Sony IMX477 sensor with a motorised M12 lens for software-controlled focus. It targets developers building Jetson Nano or Xavier NX vision systems who need remote focus adjustment without physical access to the device.

Sustained imaging behaviour

The rolling-shutter sensor delivers 4056 × 3040 stills and maintains consistent exposure during long monitoring sessions. Motorised focus operates over I2C, allowing scripted autofocus or keyboard fine-tuning while the camera runs continuously in surveillance or printer-watch roles.

Pre-order checklist

Verify your carrier board exposes the camera I2C bus and matches the 14 × 18.67 mm module footprint. Confirm the 3.9 mm focal length and 100° diagonal FOV suit the working distance, which starts at 80 mm. Standard Raspberry Pi boards are not supported; only Compute Module or Jetson platforms apply.

Přednosti

  • Motorised focus via I²C removes manual lens adjustment
  • 3 MP IMX477 sensor delivers 4056 × 3040 stills
  • 100° diagonal field of view covers wide scenes
  • Focus range 80 mm to infinity suits close and far subjects
  • Compact 14 × 18.67 mm board fits tight enclosures

Specifikace

CPU TypeOther

Otázky k tomuto produktu

Does the motorised focus draw extra power or create noise when the IMX477 runs continuously?

The focus motor is driven over the camera I²C bus and adds only a few milliwatts; it is silent because there is no fan or moving part except the tiny lens actuator.

Which host board and connector must I already own to use this M12-mount module?

You need an NVIDIA Jetson Nano or Xavier NX with a CSI-2 camera header; standard Raspberry Pi 3, 3B+ or 4 boards are not compatible.

Will the 100° diagonal field of view match the narrower 75° horizontal view I get on my current Raspberry Pi HQ Camera?

No — this module delivers 100° diagonal, 87° horizontal and 71° vertical on Jetson, which is wider than the 75° horizontal you see on the Pi HQ Camera.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.