我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Tiny bare circuit board with M12 lens module and autofocus motor

NuoTo

NuoTo IMX477 12.3MP 100° FOV M12 Lens barebone mini PC

SKU CH-E8ZR-T4JFM MPN IMX477

A 12.3MP IMX477 camera module with motorised focus and 100° field of view for Jetson Nano and Xavier NX

  • CPU TypeOther
  • Motorised focus via I²C removes manual lens adjustment
  • 3 MP IMX477 sensor delivers 4056 × 3040 stills
  • 100° diagonal field of view covers wide scenes
  • Focus range 80 mm to infinity suits close and far subjects
  • Compact 14 × 18.67 mm board fits tight enclosures

Purpose-built vision module

The NuoTo IMX477 barebone mini PC integrates a 12.3MP Sony IMX477 sensor with a motorised M12 lens for software-controlled focus. It targets developers building Jetson Nano or Xavier NX vision systems who need remote focus adjustment without physical access to the device.

Sustained imaging behaviour

The rolling-shutter sensor delivers 4056 × 3040 stills and maintains consistent exposure during long monitoring sessions. Motorised focus operates over I2C, allowing scripted autofocus or keyboard fine-tuning while the camera runs continuously in surveillance or printer-watch roles.

Pre-order checklist

Verify your carrier board exposes the camera I2C bus and matches the 14 × 18.67 mm module footprint. Confirm the 3.9 mm focal length and 100° diagonal FOV suit the working distance, which starts at 80 mm. Standard Raspberry Pi boards are not supported; only Compute Module or Jetson platforms apply.

商品特色

  • Motorised focus via I²C removes manual lens adjustment
  • 3 MP IMX477 sensor delivers 4056 × 3040 stills
  • 100° diagonal field of view covers wide scenes
  • Focus range 80 mm to infinity suits close and far subjects
  • Compact 14 × 18.67 mm board fits tight enclosures

商品規格

CPU TypeOther

商品問答

Does the motorised focus draw extra power or create noise when the IMX477 runs continuously?

The focus motor is driven over the camera I²C bus and adds only a few milliwatts; it is silent because there is no fan or moving part except the tiny lens actuator.

Which host board and connector must I already own to use this M12-mount module?

You need an NVIDIA Jetson Nano or Xavier NX with a CSI-2 camera header; standard Raspberry Pi 3, 3B+ or 4 boards are not compatible.

Will the 100° diagonal field of view match the narrower 75° horizontal view I get on my current Raspberry Pi HQ Camera?

No — this module delivers 100° diagonal, 87° horizontal and 71° vertical on Jetson, which is wider than the 75° horizontal you see on the Pi HQ Camera.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。