Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two black DDR3 desktop DIMM modules, 240-pin, no heat spreader

OWC

OWC 16GB (2x8GB) DDR3 1600 CL11 1.5V desktop RAM

SKU CH-GDF3-DTFBG

A 16 GB dual-channel DDR3 1600 kit with CL11 latency and 1.5 V operation for desktop upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit adds multitasking headroom for everyday workloads
  • DDR3 1600 CL11 timing delivers responsive performance at standard voltage
  • 5 V JEDEC operation keeps power draw low and compatibility high
  • 240-pin unbuffered non-ECC DIMMs fit mainstream desktop motherboards
  • Two matched 8 GB modules enable dual-channel bandwidth for smoother throughput

DDR3 1600 dual-channel kit

This OWC kit provides 16 GB of DDR3 1600 memory in two 8 GB unbuffered UDIMMs. The modules run at the JEDEC-standard 1.5 V with CL11 latency and use the 240-pin desktop form factor. They are designed for desktop and workstation systems that accept non-ECC DDR3 memory.

Suits standard DDR3 desktops.

The kit fits motherboards with four or two DDR3 slots that support unbuffered, non-ECC DIMMs at 1.5 V. Systems requiring registered, fully buffered, or ECC modules cannot use this memory. Laptops and small-form-factor boards that only accept SO-DIMMs are also incompatible.

240-pin DDR3 1600 CL11 at 1.5 V

The decisive specification is the 240-pin DDR3 1600 (PC3-12800) interface with CL11 timing and 1.5 V operation. If the motherboard specifies DDR3 1600 unbuffered non-ECC UDIMMs at this voltage, the kit will install and run at its rated speed.

Öne çıkanlar

  • 16 GB dual-channel kit adds multitasking headroom for everyday workloads
  • DDR3 1600 CL11 timing delivers responsive performance at standard voltage
  • 5 V JEDEC operation keeps power draw low and compatibility high
  • 240-pin unbuffered non-ECC DIMMs fit mainstream desktop motherboards
  • Two matched 8 GB modules enable dual-channel bandwidth for smoother throughput

Teknik özellikler

BrandOWC
Part Number1U6D32R8016P
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

My desktop only has two 240-pin DDR3 slots — can I install this 16GB kit without removing existing modules?

The kit contains two 8GB DIMMs and occupies both slots on a typical dual-channel board, so any current memory would need to be removed first.

Will the black unbuffered DIMMs work in a board that still runs older DDR3 modules at CL9?

All modules run at the slowest installed speed and highest latency, so the CL11 sticks will match the CL9 timing automatically.

How do I verify the kit is running at PC3-12800 after installation?

Open Task Manager or a system-information tool and confirm the memory speed reads 1600MHz with CL11 timings.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.