Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two black DDR3 desktop DIMM modules, 240-pin, no heat spreader

OWC

OWC 16GB (2x8GB) DDR3 1600 CL11 1.5V desktop RAM

SKU CH-GDF3-DTFBG

A 16 GB dual-channel DDR3 1600 kit with CL11 latency and 1.5 V operation for desktop upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit adds multitasking headroom for everyday workloads
  • DDR3 1600 CL11 timing delivers responsive performance at standard voltage
  • 5 V JEDEC operation keeps power draw low and compatibility high
  • 240-pin unbuffered non-ECC DIMMs fit mainstream desktop motherboards
  • Two matched 8 GB modules enable dual-channel bandwidth for smoother throughput

DDR3 1600 dual-channel kit

This OWC kit provides 16 GB of DDR3 1600 memory in two 8 GB unbuffered UDIMMs. The modules run at the JEDEC-standard 1.5 V with CL11 latency and use the 240-pin desktop form factor. They are designed for desktop and workstation systems that accept non-ECC DDR3 memory.

Suits standard DDR3 desktops.

The kit fits motherboards with four or two DDR3 slots that support unbuffered, non-ECC DIMMs at 1.5 V. Systems requiring registered, fully buffered, or ECC modules cannot use this memory. Laptops and small-form-factor boards that only accept SO-DIMMs are also incompatible.

240-pin DDR3 1600 CL11 at 1.5 V

The decisive specification is the 240-pin DDR3 1600 (PC3-12800) interface with CL11 timing and 1.5 V operation. If the motherboard specifies DDR3 1600 unbuffered non-ECC UDIMMs at this voltage, the kit will install and run at its rated speed.

Punti di forza

  • 16 GB dual-channel kit adds multitasking headroom for everyday workloads
  • DDR3 1600 CL11 timing delivers responsive performance at standard voltage
  • 5 V JEDEC operation keeps power draw low and compatibility high
  • 240-pin unbuffered non-ECC DIMMs fit mainstream desktop motherboards
  • Two matched 8 GB modules enable dual-channel bandwidth for smoother throughput

Caratteristiche tecniche

BrandOWC
Part Number1U6D32R8016P
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

My desktop only has two 240-pin DDR3 slots — can I install this 16GB kit without removing existing modules?

The kit contains two 8GB DIMMs and occupies both slots on a typical dual-channel board, so any current memory would need to be removed first.

Will the black unbuffered DIMMs work in a board that still runs older DDR3 modules at CL9?

All modules run at the slowest installed speed and highest latency, so the CL11 sticks will match the CL9 timing automatically.

How do I verify the kit is running at PC3-12800 after installation?

Open Task Manager or a system-information tool and confirm the memory speed reads 1600MHz with CL11 timings.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.