OWC 8GB DDR3L 1600 PC3L-12800 CL11 2Rx8 240-pin 1.35V Non-ECC UDIMM desktop RAM
- 8GB
- DDR3L 1600 (PC3L 12…
OWC
A 16 GB dual-channel DDR3 1600 kit with CL11 latency and 1.5 V operation for desktop upgrades
Capacity 16GB (2 x 8GB)
This OWC kit provides 16 GB of DDR3 1600 memory in two 8 GB unbuffered UDIMMs. The modules run at the JEDEC-standard 1.5 V with CL11 latency and use the 240-pin desktop form factor. They are designed for desktop and workstation systems that accept non-ECC DDR3 memory.
The kit fits motherboards with four or two DDR3 slots that support unbuffered, non-ECC DIMMs at 1.5 V. Systems requiring registered, fully buffered, or ECC modules cannot use this memory. Laptops and small-form-factor boards that only accept SO-DIMMs are also incompatible.
The decisive specification is the 240-pin DDR3 1600 (PC3-12800) interface with CL11 timing and 1.5 V operation. If the motherboard specifies DDR3 1600 unbuffered non-ECC UDIMMs at this voltage, the kit will install and run at its rated speed.
| Brand | OWC |
|---|---|
| Part Number | 1U6D32R8016P |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
其他版本
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
The kit contains two 8GB DIMMs and occupies both slots on a typical dual-channel board, so any current memory would need to be removed first.
All modules run at the slowest installed speed and highest latency, so the CL11 sticks will match the CL9 timing automatically.
Open Task Manager or a system-information tool and confirm the memory speed reads 1600MHz with CL11 timings.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?