Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Pimoroni Explorer board with 2.8 inch LCD screen and mini breadboard

Pimoroni

Pimoroni PIM744 Explorer RP2350 2.8" LCD Starter Kit

SKU CH-TGSW-99BZ9

A starter kit with RP2350B dual Cortex-M33 at 150 MHz, 16 MB flash, 2.8" 320×240 IPS LCD, speaker and mini breadboard for physical computing

  • RP2350B dual Arm Cortex-M33 at 150 MHz delivers responsive performance
  • 8 inch IPS LCD with 320 x 240 pixels shows clear visuals
  • 16 MB QSPI flash supports execute-in-place for fast code access
  • 520 KB SRAM provides ample memory for complex projects
  • Mini breadboard included enables instant prototyping without soldering

Starter Kit for RP2350 Projects

The Pimoroni PIM744 Explorer is a physical-computing starter kit built around the RP2350B dual Arm Cortex-M33 microcontroller running at up to 150 MHz with 520 KB of SRAM. It includes a 2.8 inch IPS LCD screen, a speaker and a mini breadboard for circuit prototyping. This all-in-one package targets beginners and makers who want a ready-to-code platform for electronics experiments.

Plug-and-Play Setup with Breadboard Access

A USB-C connector provides both programming and power without extra cables or adapters. The integrated mini breadboard sits directly on the board, so components can be inserted straight away. Beginners sometimes forget to install the MicroPython or CircuitPython firmware first, which leaves the board unresponsive until flashed.

320 x 240 IPS LCD with ST7789V Driver

The 2.8 inch display has an active area of 43.2 x 57.5 mm and a luminance of 250 cd/m², driven by the ST7789V controller over a QSPI interface backed by 16 MB of flash supporting execute-in-place. Projects that need higher resolution, touch input or a larger viewing area will require a different display module.

Öne çıkanlar

  • RP2350B dual Arm Cortex-M33 at 150 MHz delivers responsive performance
  • 8 inch IPS LCD with 320 x 240 pixels shows clear visuals
  • 16 MB QSPI flash supports execute-in-place for fast code access
  • 520 KB SRAM provides ample memory for complex projects
  • Mini breadboard included enables instant prototyping without soldering

Teknik özellikler

Bu ürün için henüz yayınlanmış teknik özellik yok.

Bu ürünle ilgili sorular

How can I confirm the 2.8" LCD is driven correctly after setup?

The 320 x 240 pixel ST7789V panel should display graphics at 250 cd/m² luminance across the 43.2 x 57.5 mm active area when the RP2350B runs your code.

What hardware is included in the box and what must I source separately?

The kit supplies the RP2350B board with 16 MB QSPI flash, 2.8" IPS LCD, mini breadboard, speaker and USB-C connector; only a USB-C cable and host computer are needed to start.

Which RP2350 variant and flash capacity does this model use?

This PIM744 board uses the RP2350B dual Arm Cortex-M33 at up to 150 MHz with 520 KB SRAM and 16 MB QSPI flash supporting execute-in-place.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.