暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Pimoroni Explorer board with 2.8 inch LCD screen and mini breadboard

Pimoroni

Pimoroni PIM744 Explorer RP2350 2.8" LCD Starter Kit

SKU CH-TGSW-99BZ9

A starter kit with RP2350B dual Cortex-M33 at 150 MHz, 16 MB flash, 2.8" 320×240 IPS LCD, speaker and mini breadboard for physical computing

  • RP2350B dual Arm Cortex-M33 at 150 MHz delivers responsive performance
  • 8 inch IPS LCD with 320 x 240 pixels shows clear visuals
  • 16 MB QSPI flash supports execute-in-place for fast code access
  • 520 KB SRAM provides ample memory for complex projects
  • Mini breadboard included enables instant prototyping without soldering

Starter Kit for RP2350 Projects

The Pimoroni PIM744 Explorer is a physical-computing starter kit built around the RP2350B dual Arm Cortex-M33 microcontroller running at up to 150 MHz with 520 KB of SRAM. It includes a 2.8 inch IPS LCD screen, a speaker and a mini breadboard for circuit prototyping. This all-in-one package targets beginners and makers who want a ready-to-code platform for electronics experiments.

Plug-and-Play Setup with Breadboard Access

A USB-C connector provides both programming and power without extra cables or adapters. The integrated mini breadboard sits directly on the board, so components can be inserted straight away. Beginners sometimes forget to install the MicroPython or CircuitPython firmware first, which leaves the board unresponsive until flashed.

320 x 240 IPS LCD with ST7789V Driver

The 2.8 inch display has an active area of 43.2 x 57.5 mm and a luminance of 250 cd/m², driven by the ST7789V controller over a QSPI interface backed by 16 MB of flash supporting execute-in-place. Projects that need higher resolution, touch input or a larger viewing area will require a different display module.

特長

  • RP2350B dual Arm Cortex-M33 at 150 MHz delivers responsive performance
  • 8 inch IPS LCD with 320 x 240 pixels shows clear visuals
  • 16 MB QSPI flash supports execute-in-place for fast code access
  • 520 KB SRAM provides ample memory for complex projects
  • Mini breadboard included enables instant prototyping without soldering

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How can I confirm the 2.8" LCD is driven correctly after setup?

The 320 x 240 pixel ST7789V panel should display graphics at 250 cd/m² luminance across the 43.2 x 57.5 mm active area when the RP2350B runs your code.

What hardware is included in the box and what must I source separately?

The kit supplies the RP2350B board with 16 MB QSPI flash, 2.8" IPS LCD, mini breadboard, speaker and USB-C connector; only a USB-C cable and host computer are needed to start.

Which RP2350 variant and flash capacity does this model use?

This PIM744 board uses the RP2350B dual Arm Cortex-M33 at up to 150 MHz with 520 KB SRAM and 16 MB QSPI flash supporting execute-in-place.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。