Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Pimoroni Explorer board with 2.8 inch LCD screen and mini breadboard

Pimoroni

Pimoroni PIM744 Explorer RP2350 2.8" LCD Starter Kit

SKU CH-TGSW-99BZ9

A starter kit with RP2350B dual Cortex-M33 at 150 MHz, 16 MB flash, 2.8" 320×240 IPS LCD, speaker and mini breadboard for physical computing

  • RP2350B dual Arm Cortex-M33 at 150 MHz delivers responsive performance
  • 8 inch IPS LCD with 320 x 240 pixels shows clear visuals
  • 16 MB QSPI flash supports execute-in-place for fast code access
  • 520 KB SRAM provides ample memory for complex projects
  • Mini breadboard included enables instant prototyping without soldering

Starter Kit for RP2350 Projects

The Pimoroni PIM744 Explorer is a physical-computing starter kit built around the RP2350B dual Arm Cortex-M33 microcontroller running at up to 150 MHz with 520 KB of SRAM. It includes a 2.8 inch IPS LCD screen, a speaker and a mini breadboard for circuit prototyping. This all-in-one package targets beginners and makers who want a ready-to-code platform for electronics experiments.

Plug-and-Play Setup with Breadboard Access

A USB-C connector provides both programming and power without extra cables or adapters. The integrated mini breadboard sits directly on the board, so components can be inserted straight away. Beginners sometimes forget to install the MicroPython or CircuitPython firmware first, which leaves the board unresponsive until flashed.

320 x 240 IPS LCD with ST7789V Driver

The 2.8 inch display has an active area of 43.2 x 57.5 mm and a luminance of 250 cd/m², driven by the ST7789V controller over a QSPI interface backed by 16 MB of flash supporting execute-in-place. Projects that need higher resolution, touch input or a larger viewing area will require a different display module.

Poudarki

  • RP2350B dual Arm Cortex-M33 at 150 MHz delivers responsive performance
  • 8 inch IPS LCD with 320 x 240 pixels shows clear visuals
  • 16 MB QSPI flash supports execute-in-place for fast code access
  • 520 KB SRAM provides ample memory for complex projects
  • Mini breadboard included enables instant prototyping without soldering

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How can I confirm the 2.8" LCD is driven correctly after setup?

The 320 x 240 pixel ST7789V panel should display graphics at 250 cd/m² luminance across the 43.2 x 57.5 mm active area when the RP2350B runs your code.

What hardware is included in the box and what must I source separately?

The kit supplies the RP2350B board with 16 MB QSPI flash, 2.8" IPS LCD, mini breadboard, speaker and USB-C connector; only a USB-C cable and host computer are needed to start.

Which RP2350 variant and flash capacity does this model use?

This PIM744 board uses the RP2350B dual Arm Cortex-M33 at up to 150 MHz with 520 KB SRAM and 16 MB QSPI flash supporting execute-in-place.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.