BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277153BTC
Stokta
RASALAS
RASALAS 16GB Kit (4x4GB) DDR3 1333MHz PC3-10600 1.5V CL9 240-pin UDIMM desktop RAM
A 16 GB kit of four 4 GB DDR3 1333 MHz modules running at 1.5 V with CL9 timing and 240-pin UDIMM form factor
- 16 GB total capacity for smoother multitasking
- 1333 MHz DDR3 speed for responsive desktop performance
- 5 V JEDEC standard voltage for broad motherboard compatibility
- 240-pin UDIMM form factor fits standard desktop slots
- Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation
Kit Configuration
This RASALAS kit contains four 4 GB DDR3 modules for a total of 16 GB. It is built for desktop systems that use 240-pin UDIMM slots and run at 1333 MHz PC3-10600 speed. The dual-rank 2Rx8 layout suits mainstream office PCs and older workstations.
Voltage Flexibility
Each stick is a dual-voltage part rated for JEDEC 1.5 V operation and can also run at 1.35 V. This lets the memory work in boards that require either voltage without manual adjustment. The CL9 latency and non-ECC unbuffered design keep timing straightforward.
Platform Check
Verify that your motherboard supports DDR3 UDIMM at 1333 MHz and accepts 1.5 V or 1.35 V modules. Confirm the board has four free 240-pin slots and can handle 16 GB total capacity. Systems limited to lower density or single-rank only will not work with this kit.
Öne çıkanlar
- 16 GB total capacity for smoother multitasking
- 1333 MHz DDR3 speed for responsive desktop performance
- 5 V JEDEC standard voltage for broad motherboard compatibility
- 240-pin UDIMM form factor fits standard desktop slots
- Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation
Teknik özellikler
Bu ürün için henüz yayınlanmış teknik özellik yok.
Bu ürünle ilgili sorular
Will the 1.5 V DDR3 modules need any firmware updates or re-seating over time?
No firmware is involved; the 240-pin UDIMM sticks are passive components. If a slot oxidises, removing and re-inserting the module usually restores contact.
What speed ceiling will the 1333 MHz kit hit first during long rendering sessions?
The JEDEC-rated 1333 MHz clock is the hard limit; the memory controller will not push the PC3-10600 modules beyond that frequency.
How much heat and power will the 1.5 V dual-rank kit add when the desktop runs all day?
Each 4 GB module draws power at the standard 1.5 V (or 1.35 V) JEDEC voltage, producing only modest warmth that a normal case airflow handles.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
