Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3 UDIMM sticks with gold contacts and black heat spreaders

RASALAS

RASALAS 16GB Kit (4x4GB) DDR3 1333MHz PC3-10600 1.5V CL9 240-pin UDIMM desktop RAM

SKU CH-CF0M-N44FT

A 16 GB kit of four 4 GB DDR3 1333 MHz modules running at 1.5 V with CL9 timing and 240-pin UDIMM form factor

  • 16 GB total capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive desktop performance
  • 5 V JEDEC standard voltage for broad motherboard compatibility
  • 240-pin UDIMM form factor fits standard desktop slots
  • Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation

Kit Configuration

This RASALAS kit contains four 4 GB DDR3 modules for a total of 16 GB. It is built for desktop systems that use 240-pin UDIMM slots and run at 1333 MHz PC3-10600 speed. The dual-rank 2Rx8 layout suits mainstream office PCs and older workstations.

Voltage Flexibility

Each stick is a dual-voltage part rated for JEDEC 1.5 V operation and can also run at 1.35 V. This lets the memory work in boards that require either voltage without manual adjustment. The CL9 latency and non-ECC unbuffered design keep timing straightforward.

Platform Check

Verify that your motherboard supports DDR3 UDIMM at 1333 MHz and accepts 1.5 V or 1.35 V modules. Confirm the board has four free 240-pin slots and can handle 16 GB total capacity. Systems limited to lower density or single-rank only will not work with this kit.

Pluspunten

  • 16 GB total capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive desktop performance
  • 5 V JEDEC standard voltage for broad motherboard compatibility
  • 240-pin UDIMM form factor fits standard desktop slots
  • Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Will the 1.5 V DDR3 modules need any firmware updates or re-seating over time?

No firmware is involved; the 240-pin UDIMM sticks are passive components. If a slot oxidises, removing and re-inserting the module usually restores contact.

What speed ceiling will the 1333 MHz kit hit first during long rendering sessions?

The JEDEC-rated 1333 MHz clock is the hard limit; the memory controller will not push the PC3-10600 modules beyond that frequency.

How much heat and power will the 1.5 V dual-rank kit add when the desktop runs all day?

Each 4 GB module draws power at the standard 1.5 V (or 1.35 V) JEDEC voltage, producing only modest warmth that a normal case airflow handles.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.