Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

RASALAS

RASALAS 16GB Kit (4x4GB) DDR3 1333MHz PC3-10600 1.5V CL9 240-pin UDIMM desktop RAM

SKU CH-CF0M-N44FT

A 16 GB kit of four 4 GB DDR3 1333 MHz modules running at 1.5 V with CL9 timing and 240-pin UDIMM form factor

  • 16 GB total capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive desktop performance
  • 5 V JEDEC standard voltage for broad motherboard compatibility
  • 240-pin UDIMM form factor fits standard desktop slots
  • Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation

Kit Configuration

This RASALAS kit contains four 4 GB DDR3 modules for a total of 16 GB. It is built for desktop systems that use 240-pin UDIMM slots and run at 1333 MHz PC3-10600 speed. The dual-rank 2Rx8 layout suits mainstream office PCs and older workstations.

Voltage Flexibility

Each stick is a dual-voltage part rated for JEDEC 1.5 V operation and can also run at 1.35 V. This lets the memory work in boards that require either voltage without manual adjustment. The CL9 latency and non-ECC unbuffered design keep timing straightforward.

Platform Check

Verify that your motherboard supports DDR3 UDIMM at 1333 MHz and accepts 1.5 V or 1.35 V modules. Confirm the board has four free 240-pin slots and can handle 16 GB total capacity. Systems limited to lower density or single-rank only will not work with this kit.

Ciri-ciri utama

  • 16 GB total capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive desktop performance
  • 5 V JEDEC standard voltage for broad motherboard compatibility
  • 240-pin UDIMM form factor fits standard desktop slots
  • Dual-voltage design operates at 1.35 V or 1.5 V for flexible installation

Spesifikasi

Belum ada spesifikasi diterbitkan untuk produk ini.

Soalan tentang produk ini

Will the 1.5 V DDR3 modules need any firmware updates or re-seating over time?

No firmware is involved; the 240-pin UDIMM sticks are passive components. If a slot oxidises, removing and re-inserting the module usually restores contact.

What speed ceiling will the 1333 MHz kit hit first during long rendering sessions?

The JEDEC-rated 1333 MHz clock is the hard limit; the memory controller will not push the PC3-10600 modules beyond that frequency.

How much heat and power will the 1.5 V dual-rank kit add when the desktop runs all day?

Each 4 GB module draws power at the standard 1.5 V (or 1.35 V) JEDEC voltage, producing only modest warmth that a normal case airflow handles.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.