Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black 22 mm Schneider Electric contact block with screw terminals

SQUARE D

SQUARE D XENG1191 22 mm 10A 600V 2NO/1NC EarlyClose

SKU CH-E88K-ES10F

A 22 mm pendent contact block rated 10 A at 600 V with 2NO/1NC early-close action for Schneider XACA stations

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size22 mm
  • Early-close action ensures make-before-break sequencing
  • 22 mm screw-clamp terminals simplify panel wiring
  • Rated 10 A at 600 V AC/DC for heavy loads
  • Meets CSA 22.2 No. 14, IEC 60947-5-1 and UL 508
  • 2NO/1NC contact form fits Schneider XACA pendent heads

Contact Block for Pendent Stations

This Schneider Electric XENG1191 contact block provides momentary make-before-break switching with a 2NO/1NC contact form. It is designed for 22 mm mounting in Schneider XACA and XACA9 pendent station heads, suited for industrial control panels requiring early-close action.

Switching Limits and Standards

The block carries a 10 A rating at 600 V AC/DC under NEMA designations A600 and Q600. It complies with CSA C22.2 No. 14, EN/IEC 60947-5-1 and UL 508, defining the maximum voltage, current and safety envelope for the application.

Early-Close Contact Timing

The defining specification is the early-close (make-before-break) contact sequence, which closes the normally-open circuits before opening the normally-closed circuit during actuation. This timing is essential for safety interlocks and sequenced control logic that cannot tolerate a momentary open state.

Öne çıkanlar

  • Early-close action ensures make-before-break sequencing
  • 22 mm screw-clamp terminals simplify panel wiring
  • Rated 10 A at 600 V AC/DC for heavy loads
  • Meets CSA 22.2 No. 14, IEC 60947-5-1 and UL 508
  • 2NO/1NC contact form fits Schneider XACA pendent heads

Teknik özellikler

Engine BrandSCHNEIDER ELECTRIC
Engine Size22 mm

Bu ürünle ilgili sorular

Should I choose the 2NO/1NC EarlyClose version or a different contact form for my pendent station?

Choose the 2NO/1NC EarlyClose block when you need two normally-open and one normally-closed circuit with make-before-break action on the same 22 mm mounting.

What does the 10A 600V rating mean once the block is wired into my control circuit?

The block carries up to 10 amps at 600 volts AC or DC per NEMA A600/Q600, so it handles standard industrial pilot-duty loads without derating.

Does the screw-clamp terminal accept standard ferrules and what torque should I apply?

The screw-clamp terminals accept standard ferrules; tighten to the torque specified in EN/IEC 60947-5-1 for 22 mm contact blocks.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.