نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 22 mm Schneider Electric contact block with screw terminals

SQUARE D

SQUARE D XENG1191 22 mm 10A 600V 2NO/1NC EarlyClose

SKU CH-E88K-ES10F

A 22 mm pendent contact block rated 10 A at 600 V with 2NO/1NC early-close action for Schneider XACA stations

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size22 mm
  • Early-close action ensures make-before-break sequencing
  • 22 mm screw-clamp terminals simplify panel wiring
  • Rated 10 A at 600 V AC/DC for heavy loads
  • Meets CSA 22.2 No. 14, IEC 60947-5-1 and UL 508
  • 2NO/1NC contact form fits Schneider XACA pendent heads

Contact Block for Pendent Stations

This Schneider Electric XENG1191 contact block provides momentary make-before-break switching with a 2NO/1NC contact form. It is designed for 22 mm mounting in Schneider XACA and XACA9 pendent station heads, suited for industrial control panels requiring early-close action.

Switching Limits and Standards

The block carries a 10 A rating at 600 V AC/DC under NEMA designations A600 and Q600. It complies with CSA C22.2 No. 14, EN/IEC 60947-5-1 and UL 508, defining the maximum voltage, current and safety envelope for the application.

Early-Close Contact Timing

The defining specification is the early-close (make-before-break) contact sequence, which closes the normally-open circuits before opening the normally-closed circuit during actuation. This timing is essential for safety interlocks and sequenced control logic that cannot tolerate a momentary open state.

أبرز المميزات

  • Early-close action ensures make-before-break sequencing
  • 22 mm screw-clamp terminals simplify panel wiring
  • Rated 10 A at 600 V AC/DC for heavy loads
  • Meets CSA 22.2 No. 14, IEC 60947-5-1 and UL 508
  • 2NO/1NC contact form fits Schneider XACA pendent heads

المواصفات

Engine BrandSCHNEIDER ELECTRIC
Engine Size22 mm

أسئلة حول هذا المنتج

Should I choose the 2NO/1NC EarlyClose version or a different contact form for my pendent station?

Choose the 2NO/1NC EarlyClose block when you need two normally-open and one normally-closed circuit with make-before-break action on the same 22 mm mounting.

What does the 10A 600V rating mean once the block is wired into my control circuit?

The block carries up to 10 amps at 600 volts AC or DC per NEMA A600/Q600, so it handles standard industrial pilot-duty loads without derating.

Does the screw-clamp terminal accept standard ferrules and what torque should I apply?

The screw-clamp terminals accept standard ferrules; tighten to the torque specified in EN/IEC 60947-5-1 for 22 mm contact blocks.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.