Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 22 mm Schneider Electric contact block with screw terminals

SQUARE D

SQUARE D XENG1191 22 mm 10A 600V 2NO/1NC EarlyClose

SKU CH-E88K-ES10F

A 22 mm pendent contact block rated 10 A at 600 V with 2NO/1NC early-close action for Schneider XACA stations

  • Engine BrandSCHNEIDER ELECTRIC
  • Engine Size22 mm
  • Early-close action ensures make-before-break sequencing
  • 22 mm screw-clamp terminals simplify panel wiring
  • Rated 10 A at 600 V AC/DC for heavy loads
  • Meets CSA 22.2 No. 14, IEC 60947-5-1 and UL 508
  • 2NO/1NC contact form fits Schneider XACA pendent heads

Contact Block for Pendent Stations

This Schneider Electric XENG1191 contact block provides momentary make-before-break switching with a 2NO/1NC contact form. It is designed for 22 mm mounting in Schneider XACA and XACA9 pendent station heads, suited for industrial control panels requiring early-close action.

Switching Limits and Standards

The block carries a 10 A rating at 600 V AC/DC under NEMA designations A600 and Q600. It complies with CSA C22.2 No. 14, EN/IEC 60947-5-1 and UL 508, defining the maximum voltage, current and safety envelope for the application.

Early-Close Contact Timing

The defining specification is the early-close (make-before-break) contact sequence, which closes the normally-open circuits before opening the normally-closed circuit during actuation. This timing is essential for safety interlocks and sequenced control logic that cannot tolerate a momentary open state.

Punti di forza

  • Early-close action ensures make-before-break sequencing
  • 22 mm screw-clamp terminals simplify panel wiring
  • Rated 10 A at 600 V AC/DC for heavy loads
  • Meets CSA 22.2 No. 14, IEC 60947-5-1 and UL 508
  • 2NO/1NC contact form fits Schneider XACA pendent heads

Caratteristiche tecniche

Engine BrandSCHNEIDER ELECTRIC
Engine Size22 mm

Domande su questo articolo

Should I choose the 2NO/1NC EarlyClose version or a different contact form for my pendent station?

Choose the 2NO/1NC EarlyClose block when you need two normally-open and one normally-closed circuit with make-before-break action on the same 22 mm mounting.

What does the 10A 600V rating mean once the block is wired into my control circuit?

The block carries up to 10 amps at 600 volts AC or DC per NEMA A600/Q600, so it handles standard industrial pilot-duty loads without derating.

Does the screw-clamp terminal accept standard ferrules and what torque should I apply?

The screw-clamp terminals accept standard ferrules; tighten to the torque specified in EN/IEC 60947-5-1 for 22 mm contact blocks.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.