SXDOOL CR1000 Tower LED CPU Cooler 4 Heatpipes PWM 4Pin

SXDOOL CR1000 Tower LED CPU Cooler

This tower-style air cooler uses four 6 mm vacuum copper heat pipes and a 44-fin aluminium stack to move heat away from mainstream desktop processors. It targets builders who want RGB illumination and PWM fan control without stepping up to a dual-tower or liquid-cooling budget. The cooler mounts on Intel LGA 775, 1150, 1151, 1155 and 1156 sockets as well as AMD AM2, AM3 and AM4 platforms. It is not suited for high-core-count workstation CPUs or overclocked enthusiast chips that exceed its thermal capacity.

4 heat pipes and 44 fins capacity headroom

The 130 mm by 75 mm fin array at 0.4 mm thickness provides enough surface area for typical gaming loads and moderate productivity workloads. Under sustained all-core stress tests the cooler will reach its thermal limit before premium dual-tower designs, so builders chasing maximum frequency headroom should look elsewhere. The PWM fan spins up automatically under load, keeping acoustics low during idle and light tasks. There is no provision for a second fan in the package.

LED PWM fan and alloy mounting kit

A single 16-LED PWM fan supplies addressable colour cycling and detachable blades for easy cleaning. The luminous logo on the tower top adds a branded glow without extra cabling. All-metal mounting hardware replaces plastic clips to prevent brittleness over time and reduces motherboard flex during transport. No software suite or controller hub is bundled; lighting runs directly from the 4-pin header.