We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SXDOOL CR1000 tower cooler with four heat pipes, LED fan and glowing top logo

SXDOOL

SXDOOL CR1000 Tower LED CPU Cooler 4 Heatpipes PWM 4Pin

SKU CH-4MT6-35C9E

Tower air cooler with four 6 mm vacuum heat pipes, 44 aluminium fins and a PWM fan featuring 16 addressable LEDs for Intel LGA 775, 1150, 1151, 1155, 1156 and AMD AM2, AM3, AM4 sockets

  • Efficient heat removal via 4 vacuum copper pipes and 44 aluminium fins
  • Quiet, temperature-controlled airflow from PWM fan with 16 built-in LED chips
  • Vibrant top-mounted logo lighting powered by 4 high-brightness colour LEDs
  • Durable all-alloy mounting hardware avoids plastic brittleness and reduces motherboard stress
  • Broad socket support covering Intel LGA 775, 1150, 1151, 1155, 1156 and AMD AM2, AM3, AM4

SXDOOL CR1000 Tower LED CPU Cooler

This tower-style air cooler uses four 6 mm vacuum copper heat pipes and a 44-fin aluminium stack to move heat away from mainstream desktop processors. It targets builders who want RGB illumination and PWM fan control without stepping up to a dual-tower or liquid-cooling budget. The cooler mounts on Intel LGA 775, 1150, 1151, 1155 and 1156 sockets as well as AMD AM2, AM3 and AM4 platforms. It is not suited for high-core-count workstation CPUs or overclocked enthusiast chips that exceed its thermal capacity.

4 heat pipes and 44 fins capacity headroom

The 130 mm by 75 mm fin array at 0.4 mm thickness provides enough surface area for typical gaming loads and moderate productivity workloads. Under sustained all-core stress tests the cooler will reach its thermal limit before premium dual-tower designs, so builders chasing maximum frequency headroom should look elsewhere. The PWM fan spins up automatically under load, keeping acoustics low during idle and light tasks. There is no provision for a second fan in the package.

LED PWM fan and alloy mounting kit

A single 16-LED PWM fan supplies addressable colour cycling and detachable blades for easy cleaning. The luminous logo on the tower top adds a branded glow without extra cabling. All-metal mounting hardware replaces plastic clips to prevent brittleness over time and reduces motherboard flex during transport. No software suite or controller hub is bundled; lighting runs directly from the 4-pin header.

Highlights

  • Efficient heat removal via 4 vacuum copper pipes and 44 aluminium fins
  • Quiet, temperature-controlled airflow from PWM fan with 16 built-in LED chips
  • Vibrant top-mounted logo lighting powered by 4 high-brightness colour LEDs
  • Durable all-alloy mounting hardware avoids plastic brittleness and reduces motherboard stress
  • Broad socket support covering Intel LGA 775, 1150, 1151, 1155, 1156 and AMD AM2, AM3, AM4

Specifications

No published specifications for this item yet.

Questions about this item

Will the CR1000 fit my older motherboard that still uses an LGA 775 socket?

Yes, the cooler includes mounting hardware for Intel LGA 775, 1150, 1151, 1155 and 1156 platforms, so it will secure properly on that socket.

How can I confirm the PWM fan is responding to CPU temperature changes?

Enter the BIOS or fan-control software and watch the RPM reading rise and fall as the load changes; the 16 onboard IC chips drive the LED colour shift at the same time.

Does the package include thermal paste or must I buy it separately?

The supplier data lists only the heatsink, four 6 mm heat pipes, 44 fins, PWM fan with detachable blades and alloy mounting brackets — no thermal compound is mentioned.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.