Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black USB-A to DB9 male serial converter cable with moulded connectors and magnetic ring, 4.92ft

UOTEK

UOTEK UT-810N USB to RS-232 converter cable 4.92ft USB-A DB9 male

SKU CH-PHGW-YVGSJ

Connects USB-A hosts to DB9 serial devices at up to 115200 bps with auto direction control and 8 kV contact ESD protection

  • TypeConverter
  • Cable Length4.92ft
  • Connector AUSB-A
  • Connector BDB9 Male
  • Plug-and-play connectivity across Windows, Mac and Linux systems
  • Auto direction control handles data flow without manual setup
  • 5 m cable reaches equipment up to 4.92 ft away
  • 8 kV contact ESD protection shields the port from static damage
  • Operates reliably from -25 °C to 70 °C in humid environments

UOTEK UT-810N USB to RS-232 converter

This UOTEK UT-810N cable converts a USB-A port into a DB9 male RS-232 serial connection. It spans 4.92ft and includes a magnetic ring for signal stability. The adapter draws under 200mA at 5V and operates from -25 to 70°C. Drivers cover Windows 2000 through 10, Mac, Linux and CE.

Suits legacy serial gear; not for high-speed links

Engineers maintaining PLCs, industrial modems, barcode scanners or older networking kit gain a reliable COM port without internal cards. Auto direction control removes manual flow-setup steps. Buyers needing throughput above 115200bps or cable runs beyond 15m RS-232 should look at other interface types.

Baud rate range 300-115200bps auto-detected

The single spec that decides fit is the supported baud window of 300 to 115200bps with automatic detection. Match this to the target device’s serial setting; if the equipment demands a fixed rate outside this band or a proprietary protocol, the converter will not establish a link.

Öne çıkanlar

  • Plug-and-play connectivity across Windows, Mac and Linux systems
  • Auto direction control handles data flow without manual setup
  • 5 m cable reaches equipment up to 4.92 ft away
  • 8 kV contact ESD protection shields the port from static damage
  • Operates reliably from -25 °C to 70 °C in humid environments

Teknik özellikler

BrandUOTEK
ModelUT-810N
TypeConverter
Cable Length4.92ft
Connector AUSB-A
Connector BDB9 Male

Bu ürünle ilgili sorular

What USB port type on my computer is needed for the UT-810N converter cable?

The cable plugs into a standard USB-A port that supplies USB 2.0 full-speed signalling and 5 V power at under 200 mA.

Will the DB9 male connector work with legacy RS-232 equipment that uses hardware flow control?

Yes, the adapter carries TXD, RXD, RTS and CTS lines and auto-controls data direction at 300 to 115,200 bps.

How can I confirm the link is active after plugging in the 4.92 ft cable?

The OS will enumerate a new COM port and the RS-232 side will transmit up to 15 m with ESD protection rated at 8 kV contact and 15 kV air discharge.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.