Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black USB-A to DB9 male serial converter cable with moulded connectors and magnetic ring, 4.92ft

UOTEK

UOTEK UT-810N USB to RS-232 converter cable 4.92ft USB-A DB9 male

SKU CH-PHGW-YVGSJ

Connects USB-A hosts to DB9 serial devices at up to 115200 bps with auto direction control and 8 kV contact ESD protection

  • TypeConverter
  • Cable Length4.92ft
  • Connector AUSB-A
  • Connector BDB9 Male
  • Plug-and-play connectivity across Windows, Mac and Linux systems
  • Auto direction control handles data flow without manual setup
  • 5 m cable reaches equipment up to 4.92 ft away
  • 8 kV contact ESD protection shields the port from static damage
  • Operates reliably from -25 °C to 70 °C in humid environments

UOTEK UT-810N USB to RS-232 converter

This UOTEK UT-810N cable converts a USB-A port into a DB9 male RS-232 serial connection. It spans 4.92ft and includes a magnetic ring for signal stability. The adapter draws under 200mA at 5V and operates from -25 to 70°C. Drivers cover Windows 2000 through 10, Mac, Linux and CE.

Suits legacy serial gear; not for high-speed links

Engineers maintaining PLCs, industrial modems, barcode scanners or older networking kit gain a reliable COM port without internal cards. Auto direction control removes manual flow-setup steps. Buyers needing throughput above 115200bps or cable runs beyond 15m RS-232 should look at other interface types.

Baud rate range 300-115200bps auto-detected

The single spec that decides fit is the supported baud window of 300 to 115200bps with automatic detection. Match this to the target device’s serial setting; if the equipment demands a fixed rate outside this band or a proprietary protocol, the converter will not establish a link.

Kohokohdat

  • Plug-and-play connectivity across Windows, Mac and Linux systems
  • Auto direction control handles data flow without manual setup
  • 5 m cable reaches equipment up to 4.92 ft away
  • 8 kV contact ESD protection shields the port from static damage
  • Operates reliably from -25 °C to 70 °C in humid environments

Tekniset tiedot

BrandUOTEK
ModelUT-810N
TypeConverter
Cable Length4.92ft
Connector AUSB-A
Connector BDB9 Male

Kysymyksiä tästä tuotteesta

What USB port type on my computer is needed for the UT-810N converter cable?

The cable plugs into a standard USB-A port that supplies USB 2.0 full-speed signalling and 5 V power at under 200 mA.

Will the DB9 male connector work with legacy RS-232 equipment that uses hardware flow control?

Yes, the adapter carries TXD, RXD, RTS and CTS lines and auto-controls data direction at 300 to 115,200 bps.

How can I confirm the link is active after plugging in the 4.92 ft cable?

The OS will enumerate a new COM port and the RS-232 side will transmit up to 15 m with ESD protection rated at 8 kV contact and 15 kV air discharge.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.