暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black USB-A to DB9 male serial converter cable with moulded connectors and magnetic ring, 4.92ft

UOTEK

UOTEK UT-810N USB to RS-232 converter cable 4.92ft USB-A DB9 male

SKU CH-PHGW-YVGSJ

Connects USB-A hosts to DB9 serial devices at up to 115200 bps with auto direction control and 8 kV contact ESD protection

  • TypeConverter
  • Cable Length4.92ft
  • Connector AUSB-A
  • Connector BDB9 Male
  • Plug-and-play connectivity across Windows, Mac and Linux systems
  • Auto direction control handles data flow without manual setup
  • 5 m cable reaches equipment up to 4.92 ft away
  • 8 kV contact ESD protection shields the port from static damage
  • Operates reliably from -25 °C to 70 °C in humid environments

UOTEK UT-810N USB to RS-232 converter

This UOTEK UT-810N cable converts a USB-A port into a DB9 male RS-232 serial connection. It spans 4.92ft and includes a magnetic ring for signal stability. The adapter draws under 200mA at 5V and operates from -25 to 70°C. Drivers cover Windows 2000 through 10, Mac, Linux and CE.

Suits legacy serial gear; not for high-speed links

Engineers maintaining PLCs, industrial modems, barcode scanners or older networking kit gain a reliable COM port without internal cards. Auto direction control removes manual flow-setup steps. Buyers needing throughput above 115200bps or cable runs beyond 15m RS-232 should look at other interface types.

Baud rate range 300-115200bps auto-detected

The single spec that decides fit is the supported baud window of 300 to 115200bps with automatic detection. Match this to the target device’s serial setting; if the equipment demands a fixed rate outside this band or a proprietary protocol, the converter will not establish a link.

特長

  • Plug-and-play connectivity across Windows, Mac and Linux systems
  • Auto direction control handles data flow without manual setup
  • 5 m cable reaches equipment up to 4.92 ft away
  • 8 kV contact ESD protection shields the port from static damage
  • Operates reliably from -25 °C to 70 °C in humid environments

仕様

BrandUOTEK
ModelUT-810N
TypeConverter
Cable Length4.92ft
Connector AUSB-A
Connector BDB9 Male

この商品に関する質問

What USB port type on my computer is needed for the UT-810N converter cable?

The cable plugs into a standard USB-A port that supplies USB 2.0 full-speed signalling and 5 V power at under 200 mA.

Will the DB9 male connector work with legacy RS-232 equipment that uses hardware flow control?

Yes, the adapter carries TXD, RXD, RTS and CTS lines and auto-controls data direction at 300 to 115,200 bps.

How can I confirm the link is active after plugging in the 4.92 ft cable?

The OS will enumerate a new COM port and the RS-232 side will transmit up to 15 m with ESD protection rated at 8 kV contact and 15 kV air discharge.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。