XPG
XPG GAMMIX S70 1TB internal SSD with HeatSink
- Internal Solid Stat…
- Consumer
$232,99
0.0030016BTC
Stokta
XPG
XPG SX8200 Pro ASX8200PNP-2TT-C 2TB internal SSD
PCIe 3.0 x4 NVMe 1.3 M.2 2280 SSD with 2 TB 3D NAND, 3500/3000 MB/s sequential, 360000 IOPS random, 1280 TBW and 2000000-hour MTBF
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 3.0 x4
Options 2TB
- 2TB
- 1TB
- Peak read speed 3500 MB/s for rapid game loads
- Peak write speed 3000 MB/s cuts video export time
- 1280 TBW endurance rating supports heavy workloads
- 2,000,000-hour MTBF indicates long-term reliability
- 3D NAND flash delivers higher density and efficiency
XPG SX8200 Pro 2TB PCIe Gen3x4 M.2 2280
This internal SSD delivers NVMe 1.3 performance for PC enthusiasts, gamers and overclockers who need fast storage. It uses a Silicon Motion controller with 3D NAND flash to reach sequential read speeds of 3500 MB/s and write speeds of 3000 MB/s. Random 4K performance hits 360,000 IOPS for both read and write workloads. The drive is rated for 1280 TBW and a 2,000,000 hour MTBF.
Check M.2 slot key and PCIe generation before
Your motherboard must provide an M-keyed M.2 2280 slot wired for PCIe 3.0 x4 to achieve the advertised speeds. NVMe 1.3 support is required for full feature compatibility. The drive operates from 0 °C to 70 °C and idles at 0.14 W, so ensure case airflow keeps temperatures within this range. No heatsink is included, so consider adding one if your chassis runs warm.
Heatsink-free design suits tight spaces
The bare M.2 2280 PCB measures 22 mm by 80 mm and fits laptops or small-form-factor desktops where a heatsink would block adjacent slots. SLC caching and a DRAM buffer accelerate burst workloads while LDPC ECC and end-to-end data protection guard integrity. A RAID engine adds another layer of reliability for heavy write cycles. Mounting uses a single M.2 screw, making installation straightforward in any compatible slot.
Öne çıkanlar
- Peak read speed 3500 MB/s for rapid game loads
- Peak write speed 3000 MB/s cuts video export time
- 1280 TBW endurance rating supports heavy workloads
- 2,000,000-hour MTBF indicates long-term reliability
- 3D NAND flash delivers higher density and efficiency
Teknik özellikler
| Brand | XPG |
|---|---|
| Series | SX8200 Pro |
| Model | ASX8200PNP-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Controller | Silicon Motion |
| Max Sequential Read | ATTO: 3350 MB/s CDM: 3500 MB/s |
| Max Sequential Write | ATTO: 2800 MB/s CDM: 3000 MB/s |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.14W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Height | 0.640 |
| Width | 4.000 |
| Depth | 5.000 |
| Weight | 0.07 |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
XPG
XPG GAMMIX S70 2TB internal SSD PCIe 4.0 x4 M.2 2280 with Heatsink
- Internal Solid Stat…
- Consumer
$293,99
0.00378746BTC
StoktaBu ürünle ilgili sorular
Does the XPG SX8200 Pro 2TB M.2 2280 SSD include a heatsink or mounting screw, or must they be purchased separately?
The drive is supplied without a heatsink. A motherboard M.2 mounting screw is not included and must be sourced separately.
Should I choose the 2TB SX8200 Pro over a smaller capacity for sustained write performance?
The 2TB model provides 1280 TBW endurance and up to 3000 MB/s sequential write, giving more consistent throughput than lower-capacity variants.
What does the 3500 MB/s sequential read figure mean when the drive is installed in a PCIe 3.0 x4 slot?
In a PCIe 3.0 x4 M.2 slot the drive can reach 3500 MB/s sequential read (CDM) and 360000 IOPS random read, limited by the Gen3 x4 interface.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
