Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
M.2 2280 circuit board with black label and gold edge connector

XPG

XPG SX8200 Pro ASX8200PNP-2TT-C 2TB internal SSD

SKU CH-J54P-466SM

PCIe 3.0 x4 NVMe 1.3 M.2 2280 SSD with 2 TB 3D NAND, 3500/3000 MB/s sequential, 360000 IOPS random, 1280 TBW and 2000000-hour MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCI-Express 3.0 x4

Options 2TB

  • Peak read speed 3500 MB/s for rapid game loads
  • Peak write speed 3000 MB/s cuts video export time
  • 1280 TBW endurance rating supports heavy workloads
  • 2,000,000-hour MTBF indicates long-term reliability
  • 3D NAND flash delivers higher density and efficiency

XPG SX8200 Pro 2TB PCIe Gen3x4 M.2 2280

This internal SSD delivers NVMe 1.3 performance for PC enthusiasts, gamers and overclockers who need fast storage. It uses a Silicon Motion controller with 3D NAND flash to reach sequential read speeds of 3500 MB/s and write speeds of 3000 MB/s. Random 4K performance hits 360,000 IOPS for both read and write workloads. The drive is rated for 1280 TBW and a 2,000,000 hour MTBF.

Check M.2 slot key and PCIe generation before

Your motherboard must provide an M-keyed M.2 2280 slot wired for PCIe 3.0 x4 to achieve the advertised speeds. NVMe 1.3 support is required for full feature compatibility. The drive operates from 0 °C to 70 °C and idles at 0.14 W, so ensure case airflow keeps temperatures within this range. No heatsink is included, so consider adding one if your chassis runs warm.

Heatsink-free design suits tight spaces

The bare M.2 2280 PCB measures 22 mm by 80 mm and fits laptops or small-form-factor desktops where a heatsink would block adjacent slots. SLC caching and a DRAM buffer accelerate burst workloads while LDPC ECC and end-to-end data protection guard integrity. A RAID engine adds another layer of reliability for heavy write cycles. Mounting uses a single M.2 screw, making installation straightforward in any compatible slot.

Helstu kostir

  • Peak read speed 3500 MB/s for rapid game loads
  • Peak write speed 3000 MB/s cuts video export time
  • 1280 TBW endurance rating supports heavy workloads
  • 2,000,000-hour MTBF indicates long-term reliability
  • 3D NAND flash delivers higher density and efficiency

Tæknilýsing

BrandXPG
SeriesSX8200 Pro
ModelASX8200PNP-2TT-C
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCI-Express 3.0 x4
ControllerSilicon Motion
Max Sequential ReadATTO: 3350 MB/s
CDM: 3500 MB/s
Max Sequential WriteATTO: 2800 MB/s
CDM: 3000 MB/s
4KB Random ReadUp to 360,000 IOPS
4KB Random WriteUp to 360,000 IOPS
Terabytes Written (TBW)1280TB
MTBF2,000,000 hours
HeatSinkwithout HeatSink
Power Consumption (Idle)0.14W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G/0.5ms
Height0.640
Width4.000
Depth5.000
Weight0.07

Aðrar útgáfur af þessari vöru

2 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the XPG SX8200 Pro 2TB M.2 2280 SSD include a heatsink or mounting screw, or must they be purchased separately?

The drive is supplied without a heatsink. A motherboard M.2 mounting screw is not included and must be sourced separately.

Should I choose the 2TB SX8200 Pro over a smaller capacity for sustained write performance?

The 2TB model provides 1280 TBW endurance and up to 3000 MB/s sequential write, giving more consistent throughput than lower-capacity variants.

What does the 3500 MB/s sequential read figure mean when the drive is installed in a PCIe 3.0 x4 slot?

In a PCIe 3.0 x4 M.2 slot the drive can reach 3500 MB/s sequential read (CDM) and 360000 IOPS random read, limited by the Gen3 x4 interface.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.