XPG GAMMIX S70 1TB internal SSD with HeatSink
- Internal Solid Stat…
- Consumer
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
XPG
PCIe 3.0 x4 NVMe 1.3 M.2 2280 SSD with 2 TB 3D NAND, 3500/3000 MB/s sequential, 360000 IOPS random, 1280 TBW and 2000000-hour MTBF
Options 2TB
This internal SSD delivers NVMe 1.3 performance for PC enthusiasts, gamers and overclockers who need fast storage. It uses a Silicon Motion controller with 3D NAND flash to reach sequential read speeds of 3500 MB/s and write speeds of 3000 MB/s. Random 4K performance hits 360,000 IOPS for both read and write workloads. The drive is rated for 1280 TBW and a 2,000,000 hour MTBF.
Your motherboard must provide an M-keyed M.2 2280 slot wired for PCIe 3.0 x4 to achieve the advertised speeds. NVMe 1.3 support is required for full feature compatibility. The drive operates from 0 °C to 70 °C and idles at 0.14 W, so ensure case airflow keeps temperatures within this range. No heatsink is included, so consider adding one if your chassis runs warm.
The bare M.2 2280 PCB measures 22 mm by 80 mm and fits laptops or small-form-factor desktops where a heatsink would block adjacent slots. SLC caching and a DRAM buffer accelerate burst workloads while LDPC ECC and end-to-end data protection guard integrity. A RAID engine adds another layer of reliability for heavy write cycles. Mounting uses a single M.2 screw, making installation straightforward in any compatible slot.
| Brand | XPG |
|---|---|
| Series | SX8200 Pro |
| Model | ASX8200PNP-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Controller | Silicon Motion |
| Max Sequential Read | ATTO: 3350 MB/s CDM: 3500 MB/s |
| Max Sequential Write | ATTO: 2800 MB/s CDM: 3000 MB/s |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.14W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Height | 0.640 |
| Width | 4.000 |
| Depth | 5.000 |
| Weight | 0.07 |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The drive is supplied without a heatsink. A motherboard M.2 mounting screw is not included and must be sourced separately.
The 2TB model provides 1280 TBW endurance and up to 3000 MB/s sequential write, giving more consistent throughput than lower-capacity variants.
In a PCIe 3.0 x4 M.2 slot the drive can reach 3500 MB/s sequential read (CDM) and 360000 IOPS random read, limited by the Gen3 x4 interface.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?