Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
ZOTAC GeForce RTX 2070 graphics card with blower cooler, dual-slot metal shroud, rear I/O bracket showing one HDMI, three

ZOTAC

ZOTAC GeForce RTX 2070 ZT-T20700A-10P graphics card

SKU CH-N55Y-FZG13 MPN ZT-T20700A-10P

Refurbished GeForce RTX 2070 with 8GB GDDR6, 2304 CUDA cores, 1620 MHz boost clock and blower cooler for multi-monitor builds

  • InterfacePCI Express 3.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 20 Series
  • GPUGeForce RTX 2070
  • Boost Clock1620 MHz
  • CUDA Cores2304
  • 8GB 256-bit GDDR6 memory enables high-resolution textures
  • 2304 CUDA cores accelerate parallel workloads
  • Boost clock reaches 1620 MHz for responsive performance
  • HDMI 2.0b plus three DisplayPort 1.4 outputs drive four displays
  • Blower cooler exhausts heat directly out of the case

ZOTAC GeForce RTX 2070 8GB

This ZOTAC GeForce RTX 2070 graphics card delivers 8GB GDDR6 memory on a 256-bit interface with 2304 CUDA cores. A boost clock of 1620 MHz and 14.0 Gbps effective memory speed drive 1440p gaming. The blower cooler exhausts heat directly out the rear bracket. It occupies two slots and measures 268 mm in length.

PCI Express 3.0 blower card for compact builds

The blower design suits small cases with limited internal airflow because it pushes hot air out the back. Builders needing a dual-slot card for a tight chassis will appreciate the 268 mm length. Users wanting quieter operation or higher overclocking headroom should consider open-air coolers with larger heatsinks and multiple fans.

175W TDP requires 550W power supply

The board draws up to 175W and connects through a single 8-pin power connector. ZOTAC specifies a 550W power supply as the minimum recommendation. Verify your PSU wattage and available 8-pin cable before purchase to ensure stable operation.

Öne çıkanlar

  • 8GB 256-bit GDDR6 memory enables high-resolution textures
  • 2304 CUDA cores accelerate parallel workloads
  • Boost clock reaches 1620 MHz for responsive performance
  • HDMI 2.0b plus three DisplayPort 1.4 outputs drive four displays
  • Blower cooler exhausts heat directly out of the case

Teknik özellikler

BrandZOTAC
ModelZT-T20700A-10P
InterfacePCI Express 3.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 20 Series
GPUGeForce RTX 2070
Boost Clock1620 MHz
CUDA Cores2304
Effective Memory Clock14.0 Gbps
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.5
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
DVI1 x DVI-D
Virtual Reality ReadyYes
CoolerBlower
Operating Systems SupportedMicrosoft Windows 10/7 x64 ‍👉Check gaming pc with Windows 11 Pro
Thermal Design Power175W
System RequirementsRecommended Power Supply: 550W
Recommended PSU Wattage550W
Power Connector8-Pin
HDCP ReadyYes
FeaturesReal-time Ray Tracing
NVIDIA Ansel
NVIDIA G-SYNC compatible
VR Ready
Max GPU Length268 mm
Card Dimensions (L x H)10.55" x 4.45"
Slot Width2 Slots
Kargo ağırlığı1.47 kg
Koli boyutu384 × 264 × 102 mm

Bu ürünle ilgili sorular

Will the 268 mm length and 2-slot width fit in my mid-tower case?

The card measures 268 mm long and occupies two expansion slots, so verify your case clearance and motherboard spacing before ordering.

Does the 8-pin power connector plug directly into the blower shroud, and which orientation is correct?

The single 8-pin connector sits on the rear edge of the blower shroud; press it straight in until the latch clicks — angled insertion can bend pins.

How often should I clean the blower heatsink and when might the thermal paste need renewal?

Blow dust from the rear exhaust vent every three to six months; thermal paste typically lasts several years under normal loads.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.