Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
ZOTAC
Refurbished GeForce RTX 2070 with 8GB GDDR6, 2304 CUDA cores, 1620 MHz boost clock and blower cooler for multi-monitor builds
This ZOTAC GeForce RTX 2070 graphics card delivers 8GB GDDR6 memory on a 256-bit interface with 2304 CUDA cores. A boost clock of 1620 MHz and 14.0 Gbps effective memory speed drive 1440p gaming. The blower cooler exhausts heat directly out the rear bracket. It occupies two slots and measures 268 mm in length.
The blower design suits small cases with limited internal airflow because it pushes hot air out the back. Builders needing a dual-slot card for a tight chassis will appreciate the 268 mm length. Users wanting quieter operation or higher overclocking headroom should consider open-air coolers with larger heatsinks and multiple fans.
The board draws up to 175W and connects through a single 8-pin power connector. ZOTAC specifies a 550W power supply as the minimum recommendation. Verify your PSU wattage and available 8-pin cable before purchase to ensure stable operation.
| Brand | ZOTAC |
|---|---|
| Model | ZT-T20700A-10P |
| Interface | PCI Express 3.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 20 Series |
| GPU | GeForce RTX 2070 |
| Boost Clock | 1620 MHz |
| CUDA Cores | 2304 |
| Effective Memory Clock | 14.0 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| DVI | 1 x DVI-D |
| Virtual Reality Ready | Yes |
| Cooler | Blower |
| Operating Systems Supported | Microsoft Windows 10/7 x64 👉Check gaming pc with Windows 11 Pro |
| Thermal Design Power | 175W |
| System Requirements | Recommended Power Supply: 550W |
| Recommended PSU Wattage | 550W |
| Power Connector | 8-Pin |
| HDCP Ready | Yes |
| Features | Real-time Ray Tracing NVIDIA Ansel NVIDIA G-SYNC compatible VR Ready |
| Max GPU Length | 268 mm |
| Card Dimensions (L x H) | 10.55" x 4.45" |
| Slot Width | 2 Slots |
| Shipping weight | 1.47 kg |
| Package size | 384 × 264 × 102 mm |
The card measures 268 mm long and occupies two expansion slots, so verify your case clearance and motherboard spacing before ordering.
The single 8-pin connector sits on the rear edge of the blower shroud; press it straight in until the latch clicks — angled insertion can bend pins.
Blow dust from the rear exhaust vent every three to six months; thermal paste typically lasts several years under normal loads.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?