Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
ZOTAC GeForce RTX 2070 graphics card with blower cooler, dual-slot metal shroud, rear I/O bracket showing one HDMI, three

ZOTAC

ZOTAC GeForce RTX 2070 ZT-T20700A-10P graphics card

SKU CH-N55Y-FZG13 MPN ZT-T20700A-10P

Refurbished GeForce RTX 2070 with 8GB GDDR6, 2304 CUDA cores, 1620 MHz boost clock and blower cooler for multi-monitor builds

  • InterfacePCI Express 3.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 20 Series
  • GPUGeForce RTX 2070
  • Boost Clock1620 MHz
  • CUDA Cores2304
  • 8GB 256-bit GDDR6 memory enables high-resolution textures
  • 2304 CUDA cores accelerate parallel workloads
  • Boost clock reaches 1620 MHz for responsive performance
  • HDMI 2.0b plus three DisplayPort 1.4 outputs drive four displays
  • Blower cooler exhausts heat directly out of the case

ZOTAC GeForce RTX 2070 8GB

This ZOTAC GeForce RTX 2070 graphics card delivers 8GB GDDR6 memory on a 256-bit interface with 2304 CUDA cores. A boost clock of 1620 MHz and 14.0 Gbps effective memory speed drive 1440p gaming. The blower cooler exhausts heat directly out the rear bracket. It occupies two slots and measures 268 mm in length.

PCI Express 3.0 blower card for compact builds

The blower design suits small cases with limited internal airflow because it pushes hot air out the back. Builders needing a dual-slot card for a tight chassis will appreciate the 268 mm length. Users wanting quieter operation or higher overclocking headroom should consider open-air coolers with larger heatsinks and multiple fans.

175W TDP requires 550W power supply

The board draws up to 175W and connects through a single 8-pin power connector. ZOTAC specifies a 550W power supply as the minimum recommendation. Verify your PSU wattage and available 8-pin cable before purchase to ensure stable operation.

Pluspunten

  • 8GB 256-bit GDDR6 memory enables high-resolution textures
  • 2304 CUDA cores accelerate parallel workloads
  • Boost clock reaches 1620 MHz for responsive performance
  • HDMI 2.0b plus three DisplayPort 1.4 outputs drive four displays
  • Blower cooler exhausts heat directly out of the case

Specificaties

BrandZOTAC
ModelZT-T20700A-10P
InterfacePCI Express 3.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 20 Series
GPUGeForce RTX 2070
Boost Clock1620 MHz
CUDA Cores2304
Effective Memory Clock14.0 Gbps
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.5
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
DVI1 x DVI-D
Virtual Reality ReadyYes
CoolerBlower
Operating Systems SupportedMicrosoft Windows 10/7 x64 ‍👉Check gaming pc with Windows 11 Pro
Thermal Design Power175W
System RequirementsRecommended Power Supply: 550W
Recommended PSU Wattage550W
Power Connector8-Pin
HDCP ReadyYes
FeaturesReal-time Ray Tracing
NVIDIA Ansel
NVIDIA G-SYNC compatible
VR Ready
Max GPU Length268 mm
Card Dimensions (L x H)10.55" x 4.45"
Slot Width2 Slots
Verzendgewicht1.47 kg
Pakketafmetingen384 × 264 × 102 mm

Vragen over dit artikel

Will the 268 mm length and 2-slot width fit in my mid-tower case?

The card measures 268 mm long and occupies two expansion slots, so verify your case clearance and motherboard spacing before ordering.

Does the 8-pin power connector plug directly into the blower shroud, and which orientation is correct?

The single 8-pin connector sits on the rear edge of the blower shroud; press it straight in until the latch clicks — angled insertion can bend pins.

How often should I clean the blower heatsink and when might the thermal paste need renewal?

Blow dust from the rear exhaust vent every three to six months; thermal paste typically lasts several years under normal loads.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.