Zyvpee
Zyvpee AD0405HS-G70 40x10mm 5V 2-pin case fan
A 40 × 10 mm 5 V case fan with a sleeve bearing that spins up to 1600 RPM and uses a 2-pin connector
- TypeCPU Cooler Fan
- Bearing Typesleeve
- RPM<1600 RPM
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- Compact 40×10 mm frame fits tight spaces
- 5 V 0.19 A draw keeps power use low
- Two-pin connector simplifies motherboard hookup
- Sub-1600 RPM sleeve bearing runs quietly
- Black non-LED design suits clean builds
Compact 40×10 mm 5 V case fan
The Zyvpee AD0405HS-G70 is a 40 mm square frame with a 10 mm thickness designed for 5 V DC operation. It draws 0.19 A through a two-pin connector and spins below 1600 RPM using a sleeve bearing.
Suited for tight 5 V cooling spots.
Builders fitting a 4010 form factor into routers, small servers or embedded boards will find the two-wire layout simple to wire. Buyers who need variable speed via PWM or a three-pin tachometer signal should look at something else.
Steady low-speed airflow under continuous load
The sleeve bearing and sub-1600 RPM rating deliver consistent airflow without the ramp-up spikes of higher-speed fans. Continuous operation at 5 V keeps noise and vibration low in confined chassis where sustained thermal stability matters more than peak throughput.
Öne çıkanlar
- Compact 40×10 mm frame fits tight spaces
- 5 V 0.19 A draw keeps power use low
- Two-pin connector simplifies motherboard hookup
- Sub-1600 RPM sleeve bearing runs quietly
- Black non-LED design suits clean builds
Teknik özellikler
| Brand | 3ccooler.com |
|---|---|
| Series | AD0405HS-G70 |
| Model | AD0405HS-G70 |
| Type | CPU Cooler Fan |
| Bearing Type | sleeve |
| RPM | <1600 RPM |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Fan |
| Dimensions | 40*10mm |
Bu ürünle ilgili sorular
What voltage header do I need on my motherboard or controller for the AD0405HS-G70 2-pin connector?
The fan runs on a 5 V supply and draws 0.19 A, so a standard 5 V 2-pin header rated for at least that current will power it.
Will the sleeve bearing and sub-1600 RPM speed keep noise low if I mount this 40x10 mm fan next to older, louder coolers?
At under 1600 RPM the AD0405HS-G70 runs quietly, and its sleeve bearing adds minimal mechanical noise compared with higher-speed legacy fans.
How can I confirm the AD0405HS-G70 is spinning correctly once installed?
Check that the blades rotate smoothly, feel airflow from the 40 mm frame, and verify the RPM reading in BIOS or monitoring software stays below 1600 RPM.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



