我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Small black 40mm square case fan, 10mm thick, two-wire connector, no lights

Zyvpee

Zyvpee AD0405HS-G70 40x10mm 5V 2-pin case fan

SKU CH-D59A-J2CJJ

A 40 × 10 mm 5 V case fan with a sleeve bearing that spins up to 1600 RPM and uses a 2-pin connector

  • TypeCPU Cooler Fan
  • Bearing Typesleeve
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40×10 mm frame fits tight spaces
  • 5 V 0.19 A draw keeps power use low
  • Two-pin connector simplifies motherboard hookup
  • Sub-1600 RPM sleeve bearing runs quietly
  • Black non-LED design suits clean builds

Compact 40×10 mm 5 V case fan

The Zyvpee AD0405HS-G70 is a 40 mm square frame with a 10 mm thickness designed for 5 V DC operation. It draws 0.19 A through a two-pin connector and spins below 1600 RPM using a sleeve bearing.

Suited for tight 5 V cooling spots.

Builders fitting a 4010 form factor into routers, small servers or embedded boards will find the two-wire layout simple to wire. Buyers who need variable speed via PWM or a three-pin tachometer signal should look at something else.

Steady low-speed airflow under continuous load

The sleeve bearing and sub-1600 RPM rating deliver consistent airflow without the ramp-up spikes of higher-speed fans. Continuous operation at 5 V keeps noise and vibration low in confined chassis where sustained thermal stability matters more than peak throughput.

商品特色

  • Compact 40×10 mm frame fits tight spaces
  • 5 V 0.19 A draw keeps power use low
  • Two-pin connector simplifies motherboard hookup
  • Sub-1600 RPM sleeve bearing runs quietly
  • Black non-LED design suits clean builds

商品規格

Brand3ccooler.com
SeriesAD0405HS-G70
ModelAD0405HS-G70
TypeCPU Cooler Fan
Bearing Typesleeve
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions40*10mm

商品問答

What voltage header do I need on my motherboard or controller for the AD0405HS-G70 2-pin connector?

The fan runs on a 5 V supply and draws 0.19 A, so a standard 5 V 2-pin header rated for at least that current will power it.

Will the sleeve bearing and sub-1600 RPM speed keep noise low if I mount this 40x10 mm fan next to older, louder coolers?

At under 1600 RPM the AD0405HS-G70 runs quietly, and its sleeve bearing adds minimal mechanical noise compared with higher-speed legacy fans.

How can I confirm the AD0405HS-G70 is spinning correctly once installed?

Check that the blades rotate smoothly, feel airflow from the 40 mm frame, and verify the RPM reading in BIOS or monitoring software stays below 1600 RPM.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。