Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Rectangular silver mining unit with dual fans front and rear, compact alloy shell, Ethernet port and buttons on face

AFRNDK

AFRNDK Antminer L3++ 580MH/s 942W Scrypt New PSU mining hardware

SKU CH-GVGY-7W11T

Scrypt ASIC miner delivering 580 MH/s at 942 W with 288 BM1485 chips in a compact 188 x 130 x 352 mm alloy chassis

  • 580 MH/s hash rate with ±5 % tolerance
  • 942 W power draw at the wall with 10 % variance
  • 62 J/MH efficiency for lower electricity cost per coin
  • 288 BM1485 ASIC chips deliver the rated performance
  • Dual-fan alloy chassis fits 188 x 130 x 352 mm for dense stacking

Scrypt ASIC for Litecoin and Dogecoin

The AFRNDK Antminer L3++ is a dedicated Scrypt miner built around 288 BM1485 ASIC chips. It targets operators who want a single unit for Litecoin or Dogecoin mining without managing GPU rigs. The device connects via Ethernet and fits in standard rack or shelf layouts.

580 MH/s at 942 W with 1.62 J/MH efficiency

Rated output is 580 MH/s with an expected variance of ±5 %. Power draw is 942 W plus a 10 % tolerance, yielding an efficiency of 1.62 J/MH at the same tolerance. The unit accepts 11.60–13.00 V DC input and operates reliably between 0 °C and 40 °C.

Upgrade from earlier L3 and L3+ models

This unit replaces the original Antminer L3 and the L3+ by delivering higher hash rate per watt in the same compact alloy chassis. The jump is worthwhile when electricity cost makes the improved 1.62 J/MH figure decisive for profitability. Four hash boards and two PCIe 6-pin connectors simplify integration into existing power infrastructure.

Акценти

  • 580 MH/s hash rate with ±5 % tolerance
  • 942 W power draw at the wall with 10 % variance
  • 62 J/MH efficiency for lower electricity cost per coin
  • 288 BM1485 ASIC chips deliver the rated performance
  • Dual-fan alloy chassis fits 188 x 130 x 352 mm for dense stacking

Спецификации

Все още няма публикувани спецификации за този артикул.

Въпроси за този артикул

Will the DC voltage input range of 11.60-13.00V match the power supply I already use for other mining gear?

The unit accepts a DC input between 11.60V and 13.00V; the included new PSU is built to deliver exactly that range, so an existing supply must meet the same voltage window and the 942W+10% load to be compatible.

How can I verify the hash boards are hashing at the rated 580MH/s after I connect the Ethernet cable?

Log into the miner's web dashboard via the Ethernet link; the real-time status page shows each of the four hash boards' individual rates, which should combine to roughly 580MH/s with the expected ±5% variance.

Does the shipment include the four data cables and the two PCI-E 6PIN power cables, or must I source them separately?

The box contains the miner with its dual-fan alloy chassis, the new PSU, four buckled data cables for the hash boards, and two PCI-E 6PIN power cables; no extra cables are required for basic operation.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.