Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver mining unit with dual fans front and rear, compact alloy shell, Ethernet port and buttons on face

AFRNDK

AFRNDK Antminer L3++ 580MH/s 942W Scrypt New PSU mining hardware

SKU CH-GVGY-7W11T

Scrypt ASIC miner delivering 580 MH/s at 942 W with 288 BM1485 chips in a compact 188 x 130 x 352 mm alloy chassis

  • 580 MH/s hash rate with ±5 % tolerance
  • 942 W power draw at the wall with 10 % variance
  • 62 J/MH efficiency for lower electricity cost per coin
  • 288 BM1485 ASIC chips deliver the rated performance
  • Dual-fan alloy chassis fits 188 x 130 x 352 mm for dense stacking

Scrypt ASIC for Litecoin and Dogecoin

The AFRNDK Antminer L3++ is a dedicated Scrypt miner built around 288 BM1485 ASIC chips. It targets operators who want a single unit for Litecoin or Dogecoin mining without managing GPU rigs. The device connects via Ethernet and fits in standard rack or shelf layouts.

580 MH/s at 942 W with 1.62 J/MH efficiency

Rated output is 580 MH/s with an expected variance of ±5 %. Power draw is 942 W plus a 10 % tolerance, yielding an efficiency of 1.62 J/MH at the same tolerance. The unit accepts 11.60–13.00 V DC input and operates reliably between 0 °C and 40 °C.

Upgrade from earlier L3 and L3+ models

This unit replaces the original Antminer L3 and the L3+ by delivering higher hash rate per watt in the same compact alloy chassis. The jump is worthwhile when electricity cost makes the improved 1.62 J/MH figure decisive for profitability. Four hash boards and two PCIe 6-pin connectors simplify integration into existing power infrastructure.

Kohokohdat

  • 580 MH/s hash rate with ±5 % tolerance
  • 942 W power draw at the wall with 10 % variance
  • 62 J/MH efficiency for lower electricity cost per coin
  • 288 BM1485 ASIC chips deliver the rated performance
  • Dual-fan alloy chassis fits 188 x 130 x 352 mm for dense stacking

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will the DC voltage input range of 11.60-13.00V match the power supply I already use for other mining gear?

The unit accepts a DC input between 11.60V and 13.00V; the included new PSU is built to deliver exactly that range, so an existing supply must meet the same voltage window and the 942W+10% load to be compatible.

How can I verify the hash boards are hashing at the rated 580MH/s after I connect the Ethernet cable?

Log into the miner's web dashboard via the Ethernet link; the real-time status page shows each of the four hash boards' individual rates, which should combine to roughly 580MH/s with the expected ±5% variance.

Does the shipment include the four data cables and the two PCI-E 6PIN power cables, or must I source them separately?

The box contains the miner with its dual-fan alloy chassis, the new PSU, four buckled data cables for the hash boards, and two PCI-E 6PIN power cables; no extra cables are required for basic operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.