Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Athena Power
An M.2 NVMe PCIe adapter backplane cage with full-height and low-profile brackets supporting 2230/2242/2260/2280 SSDs at Gen3 32 Gbps and Gen4 64 Gbps
The Athena Power SP-M21NVME fits a single M.2 NVMe M-key SSD into a PCIe x4 slot. It ships with both a full-height bracket and a low-profile bracket for different chassis. The metal tray holds drives from 2230 up to 2280 length and uses anti-vibration springs for stability. No external cables or AC adapter are required.
The enclosure relies on the metal cage and system airflow to dissipate heat without a fan. Power comes directly from the PCIe slot, so there is no separate power connector. The adapter works with PCIe 3.0 and 4.0 x4 NVMe SSDs, drawing only the power the drive itself needs. Silent operation is guaranteed because no moving parts are present.
Under continuous load the card maintains up to 32 Gbps on PCIe 3.0 and 64 Gbps on PCIe 4.0, limited by the installed SSD. The passive design has no thermal throttling mechanism beyond the metal tray, so very high-end drives may throttle in tight cases. Builders who need active cooling or multiple drive bays should look elsewhere.
| Brand | Athena Power |
|---|---|
| Series | M2U2 Series |
| Model | M.2 SSD Adapter |
| Part Number | SP-M21NVME |
| Color | Black / Silver |
| Size | M.2 |
| Type | Enclosure |
| AC Adapter | No |
| Material | Metal |
| Internal Interface | M.2 NVME M-Key |
| External Interface | No |
| HDD Count Supported | Single NVMe SSD |
| Maximum Capacity (per Bay) | 1 |
| Fan | No |
| Dimensions | 6x5x1167.3mm x 120.8mm x 19mm [Full height bracket]/167.3mm x 84mm x 19mm [Low profile bracket |
| Weight | 141.8 g |
Insert the M.2 NVMe M-key SSD (2230, 2242, 2260 or 2280) into the tray, secure it with the screw, attach the chosen full-height (120.8 mm) or low-profile (84 mm) bracket to the backplane cage, then plug the x4 card into a PCIe 3.0/4.0 x4 slot. The step people miss is swapping the bracket before mounting the card.
The adapter has no fan or moving parts, so it requires no routine maintenance. Only the installed M.2 NVMe SSD may need replacement if it reaches its write endurance limit. The anti-vibration springs and metal cage are fixed and not serviceable.
The electrical ceiling is the PCIe 3.0 x4 limit of 32 Gbps or PCIe 4.0 x4 limit of 64 Gbps, whichever your platform supports. Because there is no active cooling, the SSD itself will throttle before the adapter reaches any other bottleneck.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?