Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Black ATX mid-tower case with wood-grain corner accents, mesh front panel and sliding tempered glass side panel

AZZA

AZZA CSAZ-370 Forest ATX Mid-Tower PC Case

SKU CH-0HTA-DXHS7

ATX mid-tower case with tempered glass side panel, three included 120 mm ARGB fans, front 360 mm radiator support, 330 mm GPU clearance and 160 mm CPU cooler height

  • TypeATX Mid Tower
  • ColorBlack
  • Motherboard CompatibilityATX?Micro ATX?ITX
  • Side PanelLeft side panel: Slidable tempered glass panel
  • External 5.25" Drive Bays0
  • Internal 3.5" Drive Bays2
  • Mesh front panel maximises airflow for cooler components
  • Three 120 mm ARGB fans included with PWM control
  • Supports radiators up to 360 mm at the front
  • Fits graphics cards up to 330 mm long
  • Holds two 3.5" drives and four 2.5" drives

Forest ATX Mid-Tower case for wood-accented builds

The AZZA CSAZ-370 Forest is an ATX mid-tower chassis finished in black with wood-grain corner accents. It accepts ATX, Micro-ATX and ITX motherboards and includes three 120 mm ARGB fans and one rear 120 mm ARGB fan pre-installed. A slidable tempered glass left panel shows the interior. The front mesh panel promotes airflow into the case.

Front 360 mm radiator limit and 330 mm GPU clearance

Liquid-cooling radiators up to 360 mm fit in the front. Graphics cards up to 330 mm long are supported. The CPU cooler height limit is 160 mm. Seven expansion slots provide room for full-length add-in cards. Two internal 3.5-inch bays and four 2.5-inch bays handle storage. No external 5.25-inch bays are present.

Slidable glass panel eases access.

The left glass panel slides off without tools for quick hardware swaps. Two top-panel USB 3.0 ports, HD audio and a dedicated LED button sit on the top I/O. Included ARGB fans connect to the supplied PWM/ARGB control board; motherboard sync requires a compatible 5 V addressable RGB header. Builders needing more than two 3.5-inch drives must add external enclosures.

Акценти

  • Mesh front panel maximises airflow for cooler components
  • Three 120 mm ARGB fans included with PWM control
  • Supports radiators up to 360 mm at the front
  • Fits graphics cards up to 330 mm long
  • Holds two 3.5" drives and four 2.5" drives

Спецификации

BrandAZZA
TypeATX Mid Tower
ColorBlack
Motherboard CompatibilityATX?Micro ATX?ITX
Side PanelLeft side panel: Slidable tempered glass panel
External 5.25" Drive Bays0
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays4
Expansion Slots7
Fan Options3x120mm or 2x140mm fan ports in the front (3x120mm LFO-5212D ARGB&PWM Fan included)
2x120mm or 2x140mm fan ports on the top
1x120mm fan port in the rear (1x120mm LFO-5212D ARGB&PWM Fan included)
2 x 120 mm fan ports on the PSU shroud
Radiator OptionsFront - Up to 360mm
Max GPU Length330 mm
Max CPU Cooler Height160 mm
Dimensions486x205x400mm / 19x8.1x15.7 inches
Weight6Kg /13.2lbs

Въпроси за този артикул

Should I pick the ATX, Micro ATX or ITX version of this case?

This single case fits ATX, Micro ATX and ITX motherboards, so you do not choose a version — you just install the board you already have.

What does the 330 mm maximum GPU length mean for my graphics card?

Any card up to 330 mm long will fit; longer cards will not clear the internal structure.

Which USB standard do the front ports use and what speed does it cap at?

Two USB 3.0 ports on the top panel provide up to 5 Gbps each for connected devices.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.