NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
AZZA
ATX mid-tower case with tempered glass side panel, three included 120 mm ARGB fans, front 360 mm radiator support, 330 mm GPU clearance and 160 mm CPU cooler height
The AZZA CSAZ-370 Forest is an ATX mid-tower chassis finished in black with wood-grain corner accents. It accepts ATX, Micro-ATX and ITX motherboards and includes three 120 mm ARGB fans and one rear 120 mm ARGB fan pre-installed. A slidable tempered glass left panel shows the interior. The front mesh panel promotes airflow into the case.
Liquid-cooling radiators up to 360 mm fit in the front. Graphics cards up to 330 mm long are supported. The CPU cooler height limit is 160 mm. Seven expansion slots provide room for full-length add-in cards. Two internal 3.5-inch bays and four 2.5-inch bays handle storage. No external 5.25-inch bays are present.
The left glass panel slides off without tools for quick hardware swaps. Two top-panel USB 3.0 ports, HD audio and a dedicated LED button sit on the top I/O. Included ARGB fans connect to the supplied PWM/ARGB control board; motherboard sync requires a compatible 5 V addressable RGB header. Builders needing more than two 3.5-inch drives must add external enclosures.
| Brand | AZZA |
|---|---|
| Type | ATX Mid Tower |
| Color | Black |
| Motherboard Compatibility | ATX?Micro ATX?ITX |
| Side Panel | Left side panel: Slidable tempered glass panel |
| External 5.25" Drive Bays | 0 |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 4 |
| Expansion Slots | 7 |
| Fan Options | 3x120mm or 2x140mm fan ports in the front (3x120mm LFO-5212D ARGB&PWM Fan included) 2x120mm or 2x140mm fan ports on the top 1x120mm fan port in the rear (1x120mm LFO-5212D ARGB&PWM Fan included) 2 x 120 mm fan ports on the PSU shroud |
| Radiator Options | Front - Up to 360mm |
| Max GPU Length | 330 mm |
| Max CPU Cooler Height | 160 mm |
| Dimensions | 486x205x400mm / 19x8.1x15.7 inches |
| Weight | 6Kg /13.2lbs |
This single case fits ATX, Micro ATX and ITX motherboards, so you do not choose a version — you just install the board you already have.
Any card up to 330 mm long will fit; longer cards will not clear the internal structure.
Two USB 3.0 ports on the top panel provide up to 5 Gbps each for connected devices.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?