Silver 2U rack server, eight 3.5-inch drive bays front, dual PSU rear

DELL

DELL PowerEdge R740 8LFF 2x Xeon Silver 4215R 16GB DDR4 No Drive rack server

SKU CH-JT2S-JM20N

Rack server with eight 3.5-inch bays, dual Xeon Silver 4215R CPUs at 3.2 GHz, 16 GB DDR4 ECC memory and PERC H730P RAID controller

TypeRack
CPU TypeIntel Xeon
CPU Speed3.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB

Dual Xeon Silver 4215R processors at 3.2 GHz deliver 16 cores for multi-threaded workloads
Eight 3.5-inch drive bays with PERC H730P RAID controller enable flexible storage capacity
16 GB DDR4 ECC registered memory supports error-correcting reliability for critical applications
10 GbE dual-port 562T adapter provides high-throughput network connectivity out of the box
Dual 750 W power supplies and iDRAC9 Enterprise ensure resilient power and remote management

1 534,99 щ.д.

0.01967734 BTC по днешния курс

В наличност · изпраща се днес

На касата курсът се заключва за 30 минути.

Доставка до Съединени щати ориентировъчно

UPS Worldwide Expedited 3–6 работни дни Безплатно
DHL Express Worldwide 2–3 работни дни 74,90 щ.д.

Вносните мита се начисляват от Вашата държава при пристигане.

Доставка на друг адрес

2U 8-bay rack server

The Dell PowerEdge R740 fits a 2U form factor and provides eight 3.5-inch drive bays for high-capacity storage. Dual Xeon Silver 4215R processors run at 3.2 GHz with 11 MB cache each. A PERC H730P RAID controller and iDRAC9 Enterprise remote management are installed. 16 GB of DDR4 ECC registered memory is fitted.

Suited for storage-heavy workloads

Organisations needing dense local storage and out-of-band management will match this configuration. Buyers who require more than 16 GB of memory for virtualisation or databases must add modules up to the 3 TB limit. Builds that depend on GPU acceleration or more than two processors are not supported by this chassis.

Eight 3.5-inch SATA bays

The eight large-form-factor bays accept SATA hard drives or SSDs and connect to the PERC H730P controller for hardware RAID. No drives are included, so capacity and redundancy must be planned before deployment. The 3.5-inch bay count is the primary constraint for storage design.

Акценти

Dual Xeon Silver 4215R processors at 3.2 GHz deliver 16 cores for multi-threaded workloads
Eight 3.5-inch drive bays with PERC H730P RAID controller enable flexible storage capacity
16 GB DDR4 ECC registered memory supports error-correcting reliability for critical applications
10 GbE dual-port 562T adapter provides high-throughput network connectivity out of the box
Dual 750 W power supplies and iDRAC9 Enterprise ensure resilient power and remote management

Спецификации

Brand	DELL
Series	PowerEdge
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	3.2 GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	16GB
Memory Type	DDR4
Max Memory Capacity	3TB
Hard Drive (Installed)	4,00
Storage Controller	Dell PERC H730P Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	iDRAC9 - Enterprise License
Dimensions	36 x 24 x 10 in
Weight	40

Въпроси за този артикул

How can I confirm the PERC H730P RAID controller is recognised after the server boots?

Open the iDRAC9 Enterprise web interface and check the Storage tab — the controller and any connected SATA drives should appear with healthy status.

Which components are already installed and which ones must I supply myself?

The chassis includes two Xeon Silver 4215R CPUs, 16 GB DDR4 ECC registered memory, the PERC H730P RAID controller, a 10 GbE 2-port 562T adapter, dual 750 W power supplies and eight 3.5-inch drive bays; no hard drives or rail kit are installed.

Should I choose the 16 GB DDR4 configuration or plan for the 3 TB maximum?

Start with the installed 16 GB DDR4 if the workload fits; the board supports up to 3 TB so you can add matched DDR4 ECC registered modules later as demand grows.

Още от този рафт