Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green PCB riser board with PCIe x16 slot, USB 3.0 cable and SATA power connector

EN-Labs

EN-Labs PCIe 1x to 16x Riser Card 60cm USB 3.0 SATA Power

SKU CH-NJFY-HDD8V

Extends a single PCIe lane to a full-size slot with a 60 cm USB 3.0 cable and SATA power for stable GPU operation

  • Features3 High Quality Solid Capacitors, Voltage Regulation, and Ove
  • Solid capacitors with voltage regulation and overcurrent protection safeguard the GPU
  • 60cm USB 3.0 cable gives flexible placement for PCI-E devices
  • Molex 4-pin power draws from separate rails to reduce motherboard strain
  • Works with 1x, 4x, 8x, 16x motherboard slots
  • Set BIOS PCIe to GEN2 or GEN 1 if the graphics card is not identified

PCIe 1x to 16x Riser for GPU Mining

This EN-Labs riser card adapts a PCIe 1x motherboard slot to accept a full-size 16x graphics card. It is intended for builders assembling open-air or rack-mounted mining rigs who need to space multiple GPUs away from the board.

60cm USB 3.0 cable sets the reach

The 60cm USB 3.0 cable carries the differential signals between the 1x slot adapter and the 16x GPU connector. Its length determines how far the graphics card can sit from the motherboard in a mining frame.

SATA-to-4Pin power cable moves load off the board

A SATA to 4Pin Molex cable is included so the riser draws auxiliary power from the PSU instead of the motherboard slot. Three solid capacitors on the card provide voltage regulation and overcurrent protection for the GPU.

Акценти

  • Solid capacitors with voltage regulation and overcurrent protection safeguard the GPU
  • 60cm USB 3.0 cable gives flexible placement for PCI-E devices
  • Molex 4-pin power draws from separate rails to reduce motherboard strain
  • Works with 1x, 4x, 8x, 16x motherboard slots
  • Set BIOS PCIe to GEN2 or GEN 1 if the graphics card is not identified

Спецификации

Features3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Molex 4 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 008S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining

Въпроси за този артикул

Does the 1x to 16x riser run a graphics card at full 16x speed?

The riser connects a 16x card to a 1x slot, so the link operates at 1x bandwidth; the card will work but not at full 16x throughput

What PCIe generation does the USB 3.0 cable support and what BIOS setting may be needed?

The cable is rated for USB 3.0; if the graphics card is not recognised, set the motherboard PCIe slot to Gen 2 or Gen 1 in BIOS

What power connectors must the PSU provide for this riser kit?

The kit includes a SATA to 4‑pin Molex cable, so the power supply needs a free SATA power lead to feed the riser board

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.